VOYAGER - JBL Audio EMC - CB Certificate (repair manual)

voyager emc - cb certificate
Model
VOYAGER
Pages
56
Size
1.41 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Audio
File
voyager.pdf
Date

Read JBL VOYAGER EMC - CB Certificate online

 
 
 
 
TEST REPORT
 
 
 
 
Report No.: 
EM201300534-1
 
Application No.: 
ZJ00032799 
Applicant: 
Harman International Industries, Incorporated 
Applicant 
Address: 
Sample 
Description: 
Wireless speaker  system 
Model: 
JBL VOYAGER
 
Adding Model: 
Test Specification: 
EN300328 V1.7.1:2006 Electromagnetic compatibility and Radio spectrum 
Matters (ERM); Wideband transmission systems; Data transmission equipment 
operating in the 2,4 GHz ISM band and using wide band modulation 
techniques; Harmonized EN covering essential requirements under article 3.2 
of the R&TTE Directive   
Test  Date: 
2013-08-06 to 2013-08-11 
Issue Date: 
2013-08-13 
Test Result: 
Pass. 
Tested By: 
Reviewed By: 
Approved By: 
Lynn Xiao / Test Engineer 
Jane Cao /   Test Engineer 
Gavin Wu /  Manager 
 
Date:2013-08-14 
 
Date:2013-08-14 
 
Date:2013-08-14 
Other Aspects: 
 
None 
Abbreviations: ok / P = passed; fail / F = failed; n.a. / N = not applicable 
The test result in this test report refers exclusively to the presented test sample. This report shall not be reproduced except in full, without the written 
approval of GRGT. 
GRG Metrology and Test Technology Co., Ltd. 
Address: 163, Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, P.R. China 
Tel:+86-20-38699960 Fax:+86-20-38695185 
Email: 
Ver.:2.0 / 01.Jan.2012 
Report No.: EM201300534-1                       Application No.:
 
ZJ00032799                   Page 2 of 56 
 
DIRECTIONS OF TEST 
 
1. This station carries out test task according to the national regulation of 
verifications which can be traced to National Primary Standards and 
BIPM. 
 
2. The test report merely corresponds to the test sample. It is not permitted 
to copy extracts of these test result without the written permission of the 
test laboratory. 
 
3. If there is any objection concerning the test, the client should inform the 
laboratory within 15 days from the date of receiving the test report. 
Report No.: EM201300534-1                       Application No.:
 
ZJ00032799                   Page 3 of 56 
Table of Contents
 
1. TEST RESULT SUMMARY ................................................................................................................................................ 4 
2. GENERAL DESCRIPTION OF EUT ................................................................................................................................. 5 
2.1
 
APPLICANT ..................................................................................................................................................................... 5 
2.2
 
MANUFACTURER .......................................................................................................................................................... 5 
2.3 BASIC
 
DESCRIPTION
 
OF
 
EQUIPMENT
 
UNDER
 
TEST .............................................................................................. 5 
3. LABORATORY AND ACCREDITATIONS ...................................................................................................................... 6 
3.1
 
LABORATORY ............................................................................................................................................................... 6 
3.2
 
ACCREDITATIONS ........................................................................................................................................................ 6 
3.3
 
MEASUREMENT
 
UNCERTAINTY ............................................................................................................................... 6 
3.4
 
LIST
 
OF
 
USED
 
TEST
 
EQUIPMENT
 
AT
 
GRGT ............................................................................................................. 7 
4. RADIO TECHNICAL REQUIREMENTS SPECIFICATION IN EN 300 328 ............................................................... 8 
4.1
 
MAXIMUM
 
TRANSMIT
 
POWER .................................................................................................................................. 8 
4.1.1 LIMITS ...................................................................................................................................................................... 8
 
4.1.2 TEST PROCEDURE ................................................................................................................................................. 8
 
4.1.3 TEST SETUP ............................................................................................................................................................. 8
 
4.1.4 TEST RESULTS ......................................................................................................................................................... 9
 
4.2
 
FREQUENCY
 
RANGE .................................................................................................................................................. 16 
4.2.1 LIMITS .................................................................................................................................................................... 16
 
4.2.2 TEST PROCEDURE ............................................................................................................................................... 16
 
4.2.3 TEST SETUP ........................................................................................................................................................... 16
 
4.2.4 TEST RESULTS ....................................................................................................................................................... 16
 
4.3
 
DWELL
 
TIME ................................................................................................................................................................ 20 
4.3.1 LIMITS .................................................................................................................................................................... 20
 
4.3.2 TEST PROCEDURE ............................................................................................................................................... 20
 
4.3.3 TEST SETUP ........................................................................................................................................................... 20
 
4.3.4 TEST RESULTS ....................................................................................................................................................... 20
 
4.4
 
HOPPING
 
CHANNEL
 
SEPARATION .......................................................................................................................... 37 
4.4.1 LIMITS .................................................................................................................................................................... 37
 
4.4.2 TEST PROCEDURE ............................................................................................................................................... 37
 
4.4.3 TEST SETUP ........................................................................................................................................................... 37
 
4.4.4 TEST RESULTS ....................................................................................................................................................... 37
 
4.5
 
HOPPING
 
CHANNEL
 
SEQUENCE .............................................................................................................................. 41 
4.5.1 LIMITS .................................................................................................................................................................... 41
 
4.5.2 TEST PROCEDURE ............................................................................................................................................... 41
 
4.5.3 TEST SETUP ........................................................................................................................................................... 41
 
4.5.4 TEST RESULTS ....................................................................................................................................................... 41
 
4.6
 
MEDIUM
 
ACCESS
 
PROTOCOL .................................................................................................................................. 43 
4.6.1 DEFINITION .......................................................................................................................................................... 43
 
4.6.2 REQUIREMENT ..................................................................................................................................................... 43
 
4.6.3 FREQUENCY HOPPING SYSTEM ........................................................................................................................ 43
 
4.6.4 TEST RESULTS ....................................................................................................................................................... 44
 
4.7
 
TRANSMITTER
 
SPURIOUS
 
EMISSIONS ................................................................................................................... 45 
4.7.1 LIMITS .................................................................................................................................................................... 45
 
4.7.2 TEST PROCEDURE ............................................................................................................................................... 45
 
4.7.3 TEST SETUP ........................................................................................................................................................... 46
 
4.7.4 TEST RESULTS ....................................................................................................................................................... 47
 
5. RECEIVER REQUIREMENTS ........................................................................................................................................ 50 
5.1
 
RECEIVER
 
SPURIOUS
 
EMISSIONS ........................................................................................................................... 50 
5.1.1 LIMITS .................................................................................................................................................................... 50
 
5.1.2 TEST PROCEDURE ............................................................................................................................................... 50
 
5.1.3 TEST SETUP ........................................................................................................................................................... 51
 
5.1.4 TEST RESULTS ....................................................................................................................................................... 52
 
APPENDIX A: PHOTOGRAPH OF THE TEST ARRANGEMENT ................................................................................ 53 
APPENDIX B: PHOTOGRAPH OF THE EUT ................................................................................................................... 53 
Report No.: EM201300534-1                       Application No.:
 
ZJ00032799                   Page 4 of 56 
 
1. TEST RESULT SUMMARY  
Transmitter Part
 
Test Item 
Test Requirement 
Test Method 
Limit / Severity 
Result 
Equivalent 
isotropic 
radiated power 
EN 300 328:2006 
V1.7.1 clause 4.3.1
EN 300 328:2006 
V1.7.1 clause 5.7.2
20dBm(100mW) 
e.i.r.p. 
PASS 
Frequency 
Range 
EN 300 328:2006 
V1.7.1 clause 4.3.3
EN 300 328:2006 
V1.7.1 clause 5.7.4
2.4G to 
2.483GHz 
PASS 
Dwell Time 
EN 300 328:2006 
V1.7.1 clause 4.3.4.1
EN 300 328:2006 
V1.7.1 clause 4.3.4.1
Max 0.4s 
PASS 
Hopping 
channel 
separation 
EN 300 328:2006 
V1.7.1 clause 4.3.4.2
EN 300 328:2006 
V1.7.1 clause 4.3.4.2
1MHz PASS 
Hopping 
sequence 
EN 300 328:2006 
V1.7.1 clause 4.3.4.3
EN 300 328:2006 
V1.7.1 clause 4.3.4.3
At least 15 
hopping channels 
PASS 
Medium access 
protocol 
EN 300 328:2006 
V1.7.1 clause 4.3.5
EN 300 328:2006 
V1.7.1 clause 4.3.5
/ PASS 
Spurious 
Emission from 
Tx 
EN 300 328:2006 
V1.7.1 clause 4.3.6
EN 300 328:2006 
V1.7.1 clause 5.7.5
Table 2 & 3 
PASS 
Receiver Part 
Spurious 
Emission from 
Rx 
EN 300 328:2006 
V1.7.1 clause 4.3.7
EN 300 328:2006 
V1.7.1 clause 5.7.6
Table 4 & 5 
PASS 
Page of 56
Display

Download JBL VOYAGER EMC - CB Certificate

Here you can read online and download JBL VOYAGER EMC - CB Certificate in PDF. VOYAGER emc - cb certificate will guide through the process and help you recover, restore, fix, disassemble and repair JBL VOYAGER Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.