MX-2600N, MX-3100N, MX-2600G, MX-3100G (serv.man104). INSTALLATION MANUAL REVISION - Sharp Copying Equipment Technical Bulletin (repair manual). Page 8

MX-3100N  MX-KBX1  10 – 4

2)

Connect the connector.

3)

Install the operation panel to the main unit, and fix it with the
screw.

*1: Be careful to the place of the connector lock, it is on the 

other side.

*2: Insert the connector all the way.

4)

Remove the screw, and remove the operation base plate B
from the operation base plate unit.

5)

Slide and attach the operation base plate C (part No.2 in the
package) to the operation base plate unit.

6)

Install the operation base plate unit to the main unit, and fix it
with the screws.

7)

Attach the front cabinet upper, and fix it with the screws.

1)

When the cabinet position of the key top unit is shifted, loosen
the screws which are fixing the key top unit and adjust the
position up and down. Then tighten the screws.

1)

Insert the power plug of the main unit into the power outlet.

2)

Turn ON the power switch inside the front cabinet.

*1

*2

: '08 Oct 15