MX-2600N, MX-3100N, MX-2600G, MX-3100G (serv.man104). INSTALLATION MANUAL REVISION - Sharp Copying Equipment Technical Bulletin (repair manual). Page 6

MX-3100N  MX-2600N/3100N, MX-2600G/3100G  1 – 14

3)

Select [ALL] key.

4)

Select one of the paper feed trays that can be used to print
RSPF adjustment patterns. (Multiple selection is not allowed.)

5)

Press the [EXECUTE] button, and the machine starts self-print
of SPF adjustment patterns.

* The screen shows a message indicating that the machine is

self-printing SPF adjustment patterns.

When self-print finishes, the next screen appears where you
can start SPF adjustments.

6)

Set up the RSPF adjustment patterns on the RSPF with pat-
tern side up.

* By pressing the [REPRINT] button, you can return to the

cassette selection screen and have the machine self-print
RSPF adjustment patterns again.

7)

Press the [EXECUTE] button, and the machine starts reading
SPF adjustment patterns (for the front side).

* The machine starts calculating the adjustment amount (for

the front side) after it has read the patterns for the front side.

After the machine has finished calculating the adjustment
amount for the front side, the next screen appears where
you can have the machine start reading SPF adjustment
patterns (for the back side).

8)

Set up the RSPF adjustment patterns on the RSPF with blank
side up.

* By pressing the [REPRINT] button, you can return to the

cassette selection screen and have the machine self-print
SPF adjustment patterns again.

9)

Press the [EXECUTE] button. The machine starts scanning
RSPF adjustment patterns (for the back side).

The adjustment result screen appears.

10) press the [OK] button. The adjustment values are saved into

EEPROM and RAM and return to the top menu.

* To return to the result screen, press the [BACK] button.

• Be sure to use the specified paper for color.

1)

Enter the SIM46-74 mode.

2)

Press [EXECUTE] key.

The high density process control is performed, and the copy
color patch image (adjustment pattern) is printed out. (A3 or
11" x 17" paper is automatically selected.)

3)

Set the color patch image (adjustment pattern) paper printed in
procedure 2) on the document table.

Set the color patch image (adjustment pattern) printed in the
procedure 2) on the document table. Place the color patch
image so that the fine lines are on the left side. At that time,
place 5 sheets of white paper on the printed color patch image
(adjustment pattern).

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

(1*,1($872$'-8670(176(59,&(

(;(&87(

35(66>(;(&87(@72352&21(;(&87,21$1'35,177+(7(673$7&+

3/($6(86(63(&,),('7<3(2)$25h6,=(3$3(5

)257+,6$'-8670(17

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

(1*,1($872$'-8670(176(59,&(

(;(&87(

352&21(;(&87,1*

: '08 Oct 15