Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man104) Technical Bulletin online
MX-3100N MX-KBX1 10 – 3
2)
Open the front cabinet, and remove the screw, and remove the
front cabinet upper.
front cabinet upper.
3)
Remove the screw, and remove the operation base plate unit.
4)
Remove the screws and disconnect two connectors. Place the
operation panel upside down on the protection sheet.
operation panel upside down on the protection sheet.
*1: Don't pull the lead wire. The connector can be locked.
Hold the housing section of connector, pull out it.
*2: Slowly pull the lead wire and disconnect the connector.
*3: There is a locking section on the reverse side. Use care for
that.
5)
Remove the screw, and remove the panel angle.
6)
Install the keyboard unit (part No.1 in the package), and fix it
with the fixing screw A (part No.5 in the package) and the fixing
screw B (part No.6 in the package).
with the fixing screw A (part No.5 in the package) and the fixing
screw B (part No.6 in the package).
* When fixing the fixing screw B, use the short screwdriver or
the small screwdriver.
D. Install the operation panel
1)
Check that each harness is engaged with the rib.
1
*1 *3
*2
1
1
: '08 Oct 15
1
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man104) service manuals if exist.