Read Sharp MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man104) Technical Bulletin online
MX-3100N MX-2600N/3100N, MX-2600G/3100G 1 – 12
(2)
Image registration adjustment
1)
Enter SIM50-22 mode.
2)
Select the adjustment target item "ALL".
ALL:
Image registration (Auto adjustment of the main scanning
direction, the sub scanning direction and the OPC drum
phase)
Image registration (Auto adjustment of the main scanning
direction, the sub scanning direction and the OPC drum
phase)
3)
Press [EXECUTE] key.
The adjustment are executed automatically and adjustment
result data is displayed.
result data is displayed.
4)
Check the image registration.
NOTE: For details of the checking procedures of the image regis-
tration, refer to the ADJ10B and the ADJ10C.
tration, refer to the ADJ10B and the ADJ10C.
(3)
Image loss, void area, image off-center adjustment
Make a copy in the original table mode and in the RSPF/DSPF
mode. Check to confirm that the image loss and the void area are
in the range shown below.
mode. Check to confirm that the image loss and the void area are
in the range shown below.
NOTE: For details of the checking procedures of the image loss
and the void area, refer to the ADJ17 and the ADJ18.
and the void area, refer to the ADJ17 and the ADJ18.
(Adjustment procedure)
a. Image off-center automatic adjustment
(in original table mode)
1)
Enter the SIM50-28 mode.
2)
Select [SETUP/PRINT] ADJ with the key button.
3)
Select [ALL] with the key button.
(Note)
By pressing [LEAD] or [OFFSET] button, the following items
can be executed individually.
can be executed individually.
* [LEAD]: Print image lead edge image position adjustment
* [OFFSET]: Print image off-center adjustment
When [ALL] is selected, both of the above two items are
executed simultaneously.
executed simultaneously.
4)
Select a paper feed tray to be adjusted.
(Select all of paper feed trays.)
(Select all of paper feed trays.)
* Ensure paper is in all trays for proper adjustment.
5)
Press [EXECUTE] key.
The adjustment pattern is printed out.
(Each paper is fed from selected paper feed tray, and the indi-
vidual pattern according to each paper feed tray is printed out.)
vidual pattern according to each paper feed tray is printed out.)
6)
Set the adjustment pattern on the document table. (Any direc-
tion)
tion)
NOTE: Fit the adjustment pattern correctly with the document
guide.
7)
Press [EXECUTE] key.
The following item is automatically adjustment.
* Print image lead edge image position adjustment
* Print image off-center adjustment
Perform procedures 6) to 7) for adjustment patterns output
from each paper feed tray.
from each paper feed tray.
8)
Press [OK] key.
The adjustment result becomes valid.
Perform procedures 4) to 7) for each paper feed tray.
Content
Standard adjustment value
Lead edge void area
3.0
r1.0mm
Rear edge void area
2.0 - 5.0mm
FRONT/REAR void area
2.0
r2.0mm
Lead edge image loss adjustment
3.0
r1.0mm
Side image loss adjustment
2.0
r1.0mm
1
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$872,0$*(326,7,21$'-8670(176(59,&(
2&ǂ$'-
%.0$*ǂ$'-
63)ǂ$'-
6(78335,17ǂ$'-
5(68/7
'$7$
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$872,0$*(326,7,21$'-8670(176(59,&(
/($'
2))6(7
$//
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$872,0$*(326,7,21$'-8670(176(59,&(
(;(&87(
0)7
&6
$'8
&6
&6
&6
/&&
: '08 Oct 15
1
Click on the first or last page to see other MX-2600N / MX-3100N / MX-2600G / MX-3100G (serv.man104) service manuals if exist.