Read Sharp AR-PE1 (serv.man36) Technical Bulletin online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 029.doc
Page: 3 of 3
Action Performed by the ARPE1 Fiery Controller during a v1.10 System Software Installation
Start Time For each
Action
(Minutes)
Action Being Performed
ARPE1 LCD Panel Display
Connected Monitor Display
(Can be viewed if the optional FACI kit has been installed in the ARPE1).
Insert the System Software CD in to the ARPE1 and re-boot the
ARPE1.
Select Yes and click the button next to OK.
All data will be deleted. Continue ? Yes/No
Starting MS-DOS
0
A Ghost Image is copied from the CD to the ARPE1 hard disk.
Installing
Ghost software displays that a ghost image is being loaded on to the ARPE1
3
Insert CD 2 and power off/on the ARPE1.
To complete the install, Insert CD2 and recycle the power.
A:\
4
Interrupts / hardware / and memory are tested at re-boot
Interrupts / hardware / and memory are being tested
Starting MS-DOS
The software on CD2 is about to be installed.
Server software will be installed. Yes/No
Starting MS-DOS
6
The files are copied to the ARPE1 hard disc.
Copying Files
Starting MS-DOS
8
Remove CD2 and recycle the ARPE1
To complete the install, remove the CD & recycle power
C:\
9
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
11
Interrupts / hardware / and memory are tested at re-boot and then the
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
The ARPE1 automatically reboots itself.
13
Interrupts / hardware / and memory are tested at re-boot.
Loading
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
Initialising System
The software installation can be monitored.
20
A Backup Ghost Image is now copied from the hard drive to a separate
partition on the ARPE1 hard disc.
Creating System Backup
Ghost software displays that the backup image is being loaded on to the ARPE1
hard disc. (The ghost image software runs twice).
28
The ARPE1 automatically reboots itself.
Interrupts / hardware / and memory are tested at re-boot.
Standard NT Load up screens
(NTDetect, OSLoader, Blue boot up screen)
X4 Background is displayed and CTRL-ALT-Delete for logon.
Loading
29
Updating System
Service Control Manager highlights that a service has failed to load.
32
an idle ready condition.
Idle
Fiery X4 Background Picture
Total Installation time - Approx 32 minutes.
