Read Sharp MX-FN11 (serv.man15) Technical Bulletin online
Date:
7
th
May 2009
Model:
MX-FN11
Ref.:
001
Colour:
White
Page:
1 of 2
TECHNICAL BULLETIN
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-673
1. Model Name: MX-FN11 (Optional part for MX-4100 series / 5000 series, MX-M283N/ M363 series /
M453 series / M503 series)
2. Description: ROM upgrade
* Check that the ROM version is “010102” or newer when installing the finisher (MX-FN11) to
MX-M283N/ M363 series/ M453 series/ M503 series.
If the version number of MX-FN11 is older than “010102”, upgrade the version to “010102” or
newer before using the finisher.
If the ROM version is older, the problem described in page 2 tends to appear.
If the version number of MX-FN11 is older than “010102”, upgrade the version to “010102” or
newer before using the finisher.
If the ROM version is older, the problem described in page 2 tends to appear.
From mid-May 2009 production
ROM control No.
Version No.
A11 010102
Item of change: See the accompanying sheet.
* Part code of control board has been changed along with the ROM upgrade. However, modification
can be made by upgrading the existing control board. Therefore, it is not necessary to replace
the control board.
the control board.
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty Parts
name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1 MX-FN11 ALL
5- 0CW4146K522// 0CW4146K522B/
CM
1
CONTROL PWB
2009/5
Mid
3
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
MX-FN11 ROM UPGRADE ..... (1).
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-673
[Description]
No. Items
Detail
1
Modification of problem
Paper jam is detected while outputting paper onto lower tray after upper tray-full. When
papers are removed during jam clearance, tray switched automatically. However, F1-15
trouble is detected at this point because upper tray declines while outputting onto lower
tray. Modification is made to fix this problem.
papers are removed during jam clearance, tray switched automatically. However, F1-15
trouble is detected at this point because upper tray declines while outputting onto lower
tray. Modification is made to fix this problem.
2
Modification of problem
Display