Read Sharp AR-F14 (serv.man7) Service Manual online
AR-F14/PN1 MACHINE OPERATION 7-2
2. Setup by the printer driver
A. Setup procedures when the staple function is used
1) Select "PROPERTY" in the setup menu of the printer driver.
2) Click the "MAIN" tab.
3) In the "FINISH" item, select "Stapling position" and "Staple."
B. Setup procedures when the saddle stitch function is used
1) Select "PROPERTY" in the setup menu of the printer driver.
2) Click the "MAIN" tab.
3) In the "DUPLEX PRINT" items, put a check mark to the radio button of "Center binding."
4) Select between the normal-ratio center binding and 2-UP center binding.
5) In the "FINISH" item, select "2-position binding" of "STAPLE."
C. Setup procedures when the punch function is used
1) Select "PROPERTY" in the setup menu of the printer driver.
2) Click the "MAIN" tab.
3) In the "FINISH" items, put a check mark to the check box of "PUNCH."
3. Using the saddle stitch finisher functions in copy mode
Touch the [OUTPUT] key in the main screen of copy mode to display the screen for selecting saddle stitch finisher functions. Selections include the sort
function, staple sort function, saddle stitch function, group function, and output tray.
function, staple sort function, saddle stitch function, group function, and output tray.
1. [GROUP] key
Select this function to have output grouped by page.
2. [STAPLE SORT] key
Select this function to have output collated into sets and stapled.
3. [SORT] key
Select this function to have output collated into sets.
4. Icon display
When the sort, staple sort, group, or saddle stitch function is selected,
the corresponding icon appears here.
5. [OFFSET TRAY] key
Select this key to have output delivered to the offset tray. (When the
staple sort function is selected, the offset tray is automatically selected.)
staple sort function is selected, the offset tray is automatically selected.)
6. [CENTER TRAY] key
Select this key to have output delivered to the center tray.
7. [OK] key
Touch this key to close the screen and return to the main screen.
8. [OFFSET] key
When a checkmark appears, the offset function operates. When the
checkmark is removed, the offset function does not operate.
checkmark is removed, the offset function does not operate.
(The offset function does not operate when the staple sort function or the
saddle stitch function is selected.)
9. [SADDLE STITCH] key
Each set of output is stapled along the centerline of the paper and
folded.
When this function is selected, the "Pamphlet copy" function is
automatically selected.
automatically selected.
Note: When "AUTOMATIC SADDLE STITCH" is disabled in the key
operator programs, the "Pamphlet copy" is not automatically
selected.
10. [PUNCH] key
When a punch unit is installed, select this key to punch holes in the
output.
output.
*
When a function is selected, it is highlighted.
Caution: When the saddle stitch finisher is disabled in the key operator
programs, the saddle stitch finisher functions cannot be used.
OK
OUTPUT
OFFSET TRAY
OFFSET
CENTER TRAY
SADDLE
STITCH
STITCH
PUNCH
The displayed menu will vary
depending on the country and
regions.
depending on the country and
regions.
STAPLE
SORT
GROUP
SORT
[07]MACHINEOPERATION.fm 2 ページ ２００４年４月１９日 月曜日 午後１時４１分
Display
