AR-D16. Service manual - Sharp Copying Equipment Service Manual (repair manual). Page 9

AR-SP5  UNPACKING AND INSTALLATION  2 - 7

The following term is used in this section.

Means the unit as a printer and scanner.

• For this description, it is assumed that the mouse is configured for

right hand operation.

• To print or scan, the MFP must be in the online state.

• The scanner feature only works when using a USB interface cable.

• If any error message appears, solve the problem following the

instructions on the screen. After your problem is solved, the installing
procedure will be continued. Depending on your problem, you may
have to exit the installer. In this case, click the "Cancel" button to exit
the installer. After solving your problem, reinstall the software from
the beginning.

Before starting the installation, make sure the USB or parallel interface
cable is not connected to the MFP.

1) Insert the supplied CD-ROM into your CD-ROM drive.

2) Click the "start" button, click "My Computer", and then double-click

the CD-ROM icon. 

• When any of "Found New Hardware Wizard" messages appear

during the software installation, be sure to click the "Cancel" but-
ton.

3) Double-click the "Setup" icon.

If the language selection screen appears after you double click the
"Setup" icon, select the language you wish to use and click the
"Next" button. (Normally, the correct language is selected automat-
ically.)

4) Select the software packages to be installed, and then click the

"Next" button.

The software packages with checkmark on the list on the screen
will be installed.

Click the "Display README" button to show the information on the
selected package.

• If you are using the parallel interface connection, do not select

the Button Manager checkbox because this feature is not sup-
ported with the parallel interface.

• If the following screen appears, click the "OK" button. Review

the contents in "BEFORE INSTALLATION", and then select only
appropriate the software packages to be installed.

5) Review the software packages to be installed on the screen, and

then click the "Start" button.

The software packages to be installed will be displayed on the
screen. If inappropriate packages are displayed, click the "Back"
button to select appropriate packages again.

6) Copying files for MFP driver installation and parallel interface setup

(This step will start if it was selected in step 4).

1. After confirming the message in the "Welcome" window, click

the "Next" button.

2. A dialog box appears asking you to verify that the USB or par-

allel interface cable is not connected to the MFP. Make sure
that the interface cable is not connected and click the "Next"
button.

3. Click the "Next" button in the dialog box to install the MFP

driver or Cancel to quit the installation.

The setup program will start to copy the files.
If the following screen appears while the files are being copied
(the message may appear more than once), click "Continue
Anyway". 

4. When the "The MFP driver installation is complete." dialog box

appears, click the "OK" button.

The Button Manager installer will start.

7) Begin installation of the Button Manager (This step will start if it

was selected in step 4).

1. After confirming the message in the "Welcome" window, click

the "Next" button.

2. Read the message in the "Please read the following informa-

tion." window, and then click the "Next" button.

3. When a message appears that lets you specify the location for

the software to be installed, click the "Next" button.

4. If the program displays, "Do you want the Button Manager

added to Windows Startup?", check "Yes" and click the "OK"
button.

The setup program will start to copy the files.

5. Click the "Finish" button when the message informs you that

setup is successful.

The Sharpdesk installer will start.

8) Begin installation of the Sharpdesk (This step will start if it was

selected in step 4).

1. After confirming the message in the "Welcome to Sharpdesk

installation" window, click the "Next" button.

2. Read the message in the "Information" window, and then click

the "Next" button.

3. When the "Choose Destination Location" window appears,

click the "Next" button.