Read Sharp AR-D16 Service Manual online
AR-SP5 UNPACKING AND INSTALLATION 2 - 3
11) Attach the cover to the rear cabinet.
<1> Align the arrow marks as shown in the illustration.
<2> Then slide the cover to the left.
<3> Secure the cover with a screw.
12) Attach the SPF to the copier.
Attach the SPF by inserting the hinge guide sections of the SP5
into the hinge guides L and R.
into the hinge guides L and R.
13) Insert the power plug into the outlet and turn the main switch of the
copier to the “ON” position.
14) Perform SIM setting.
Execute simulation [2] of [26] and enter [1].
15) Check the ON/OFF operation of the open detection sensor.
Execute simulation [2] of [2] and check that the indicator on the
operation panel lights up and goes out by opening and closing the
SPF.
operation panel lights up and goes out by opening and closing the
SPF.
16) Carry out automatic adjustment of SPF scanning position.
Execute simulation 53-08 to carry out automatic adjustment of
SPF scanning position.
SPF scanning position.
For details, see the service manual.
17) Check the copy ratio, and then check the center displacement and
leading edge image void.
Place an original on the document glass and make a copy.
Then, place anoriginal in the document feeder tray and make a
copy.
copy.
If the center of the copy from the document glass is displaced from
the copyfrom the document feeder, adjust the center referring to
the service manual.
the copyfrom the document feeder, adjust the center referring to
the service manual.
2. AR-D16 Installation Manual
Turn the main switch to the “OFF” position and removethe power plug
from the outlet.
from the outlet.
1) Remove the DV cartridge and the drum cartridge from the copier.
Open the tray, the side door, and the front cabinet, and then
remove the DV cartridge and the drum cartridge.
remove the DV cartridge and the drum cartridge.
Note: Be sure to carry out the operation in the order of (1), (2), (3),
and (4).
2) Make the copier upright.
Close the front cover, side cover, and bypass tray, and then make
the copier upright in the orientation shown in the illustration.
the copier upright in the orientation shown in the illustration.
1
2
2
•
Parts included
•
Screws (M4
×
16), 4 pcs.
1
2
3
4
Click on the first or last page to see other AR-D16 service manuals if exist.