AR-D16. Service manual - Sharp Copying Equipment Service Manual (repair manual). Page 10

AR-SP5  UNPACKING AND INSTALLATION  2 - 8

4.

When the "Select Program Folder" window appears, click the
"Next" button.

The setup program will start to copy the files.
If the dialog box asking "If you have TIFF files saved using
Photo-Shop or Imaging for Windows you should hit Skip"
appears. Answer the question to continue the Sharpdesk
installation.

5.

Click the "Finish" button when the message informs you that
Setup is complete.

9) Click the "Close" button when the message informs you that

"Setup has finished". When the "Now connect the MFP interface
cable to the PC" dialog box appears, click the "OK" button.

• After the installation, a message to restart your computer may be

displayed. In this case, click the "Yes" button to restart your com-
puter.

• For parallel interface connection ensure that your computer and

MFP are turned off before connecting the cable.

10) Connect the USB interface cable or parallel interface cable (see

page 5-8).

Windows will detect the MFP and the Plug and Play screen will
appear. If you are using Windows XP with the parallel interface, go
to step 12.

11) Begin installation of the scanner driver.

1. "SHARP AL-xxxx" (where xxxx is the model name of your

MFP) will appear in the "Found New Hardware Wizard" dialog
box. Select "Install the software automatically (Recom-
mended)" and click the "Next" button.

2. The "Install hardware" dialog box will appear. Click the "Con-

tinue Anyway" button.

3. When installation of the driver is completed, click the "Finish"

button to finish the scanner driver installation.

12) Begin installation of the printer driver.

1. "SHARP AL-xxxx" (where xxxx is the model name of your

MFP) will appear in the "Found New Hardware Wizard" dialog
box. Select "Install the software automatically (Recom-
mended)" and click the "Next" button.

2. The "Hardware Installation" dialog box will appear. Click the

"Continue Anyway" button.

3. When installation of the driver is completed, click the "Finish"

button to finish the printer driver installation.

You have completed the installation of all the software.

Before starting the installation, make sure the USB interface cable is
not connected to the MFP.

1) Insert the supplied CD-ROM into your CD-ROM drive.

2) Double-click "My Computer", and then double-click the CD-ROM

icon.

• When any of "Hardware Found", or "Found New Hardware Wiz-

ard" messages appear during the software installation, be sure
to click the "Cancel" button.

3) Double-click the "Setup" icon.

• If the language selection screen appears after you double click

the "Setup" icon, select the language you wish to use and click
the "Next" button. (Normally, the correct language is selected
automatically.)

4) Select the software packages to be installed, and then click the

"Next" button.

The software packages with checkmark on the list on the screen
will be installed. Click the "Display README" button to show the
information on the selected package. 

• If the following screen appears, click the "OK" button. Review

the contents in "BEFORE INSTALLATION", and then select the
appropriate driver software packages to be installed.

5) Review the software packages to be installed on the screen, and

then click the "Start" button.

The software packages to be installed will be displayed on the
screen. If inappropriate packages are displayed, click the "Back"
button to select appropriate packages again.

6) Copying files for MFP driver installation.

1. After confirming the message in the "Welcome" window, click

the "Next" button.

2. A dialog box appears asking you to verify that the interface

cable is not connected to the MFP. Make sure that the inter-
face cable is not connected and click the "Next" button.

3. Click the "Next" button in the dialog box showing the files to be

copied for installation of the MFP driver.

The setup program will start to copy the files.

In Windows 2000, if the following screen appears while the
files are being copied (the message may appear more than
once), click "Yes" in Windows 2000.