Read Sharp AR-D16 Service Manual online
AR-SP5 UNPACKING AND INSTALLATION 2 - 4
3) Remove the OP gear cover and rubber feet from the bottom of the
copier.
Remove the screw and remove the OP gear cover.
Then, take off and remove the rubber feet.
4) Install the second cassette unit to the copier.
If the second cassette unit is aligned to the copier, it can be posi-
tioned automatically.
tioned automatically.
Hold the copier lightly to prevent it from toppling down and secure
the second cassette unit with four screws (M4
the second cassette unit with four screws (M4
×
16).
5) Remove the rear cover and connect the connector.
Remove the screw and remove the rear cover.
Then, connect the connector of the second cassette unit to that of
the copier.
the copier.
6) Attach the rear cover.
Attach the rear cover to its original position and secure it with the
screw (M4
screw (M4
×
12).
7) Return the copier to the normal orientation.
When returning the copier to the normal orientation, gently return it
without giving a shock.
without giving a shock.
Rubber foot
OP gear cover
Rubber foot
Click on the first or last page to see other AR-D16 service manuals if exist.