Read Sharp AR-D16 Service Manual online
AR-SP5 UNPACKING AND INSTALLATION 2 - 1
[2] UNPACKING AND INSTALLATION
1. AR-SP5 Installation Manual
Turn the main switch to the “OFF” position and remove the power plug
from the outlet.
from the outlet.
1) Remove the document cover.
Remove the document cover from the copier.
2) Remove the rear cabinet.
Remove the four screws and then remove the rear cabinet.
3) Remove the hinge guides L and R.
Remove the screws (two for each) and then remove the hinge
guides L and R.
guides L and R.
4) Remove the rear cover for the document glass.
<1> Remove the screw and then remove the right glass holder.
<2> Slide the rear cover for the document glass to remove it.
5) Attach the book sensor unit.
Insert the actuator of the book sensor unit into the mounting por-
tion in the copier and fix it using the supplied screw (M3
tion in the copier and fix it using the supplied screw (M3
×
8).
Note: When attaching the sensor unit, fix it using the screw while
pushing the unit upward.
Connect the connector to the connector of the copier and arrange
the wiring as shown in the illustration.
the wiring as shown in the illustration.
•
Hinge guide L
•
Hinge guide R
•
Installation manual, 1 sheets
•
Parts included
•
Screws (M3
×
8), 1 pcs.
•
SPF unit
•
SPF rear cover, 1 pc.
•
Book sensor unit, 1 pc.
1
2
Actuator
1
3
2
Click on the first or last page to see other AR-D16 service manuals if exist.