AR-C260 (serv.man70). Countermeasure Against Black Streaks Voids on Copies. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 3

Read Sharp AR-C260 (serv.man70) Technical Bulletin online

 
 
CCE157 
Sharp Electronics (UK) Ltd., Technical Services Group
 
 
 
 
2. Unfasten 2 screws (M3*8) on both sides, and then unfasten 5 screws (M3*6). (Figure 2) 
 
 
 
3. By removing DC-PLT-U, the 2nd Blade will be unfixed and can be removed. 
 
 
 
 
4. Put back the DC-PLT-U to the original location, and then fasten the screws (M3*6) in order of number 
    (1 to 5) – starting from the left. 
 
    Note:- Fastening screw torque=0.4±0.02N   m 
 
    At this point, make sure that the bosses on the plate are properly through the holes of DC-PLT-U. 
 
 
 
 
 
5. Fasten the 2 screws (M3*8) on both sides. 
 
    Note: Fastening screw torque=0.7±0.02N   m 
 
 
6. Hook the 4 cover pawls of the DC-COV, and then fasten it with 2 black screws.  
 
Page of 3
Display

Download Sharp AR-C260 (serv.man70) Technical Bulletin