AL-1566 (serv.man14). User program - Sharp Copying Equipment Service Manual (repair manual). Page 2

AL-1556/1566  USER PROGRAM  11 - 2

*

1

: The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.

1) Press the [MENU] key and then press the [OK] key.

In printer mode, the user programs are accessed by simply press-
ing the [MENU] key.

2) Press the [<] key [v

]

 or [

>

] key [

^]

 to  select the item that you wish

to configure in the USER PROGRAM items, and then press the
[OK] key.

• You can also select a program by directly entering the program

number with the numeric keys.

3) Press the [

<

] key [v] or [

>

] key [^] to change the setting of the

selected item.

NOTE:

• If you mistakenly select the wrong item, press the [CLEAR] key [C]

and repeat the procedure from step 2.

• To cancel a setting for a user program, press the [MENU] key.

4) Press the [OK] key.

Your selection appears briefly and then the previous screen
appears.

NOTE:

When "AE LEVEL ADJUST" is selected in the user programs and the
[OK] key is pressed, the automatic exposure adjustment screen
appears. Adjust the exposure and press the [OK] key.

16

SOUND AT 
DEFAULT

1: ON
2: OFF

• Use this to sound a beep when a base setting is selected.

17

TONER SAVE 
MODE

1: ON
2: OFF

• This mode reduces toner usage by about 10% when copying. Toner save mode is 

effective when the exposure mode is AUTO or TEXT.

18

AE LEVEL ADJUST

1: SPF/RSPF
2: DOCUMENT GLASS

• This is used to adjust the exposure level.
• The automatic exposure level can be adjusted separately for the document glass 

and the RSPF.

19

LANGUAGE

This is used to set the language used in the display.

20

RESET FACTORY

1: Yes
2: No

This is used to return all settings to the factory default settings.

21

SORT AUTO 
SELECT

1: ON
2: OFF

Used to sort SPF/RSPF copies automatically.

Program

number

Program name

Setting codes

(factory default setting 

appears in bold)

Explanation

Program

number

Program name

Setting codes

(factory default setting 

appears in bold)

Explanation

1

FORCED OUTPUT

1: ON
2: OFF

When this function is enabled, printing in printer mode will automatically continue 
using a different size of paper if the specified size of paper runs out in all trays. This 
feature does not function in copy mode.

2

USB 2.0 MODE 
SWITCH *

1

1: FULL-SPEED
2: HI-SPEED

1

1

2

2

2

2

1

1

1,2,3,

1,2,3,

SP. FUNC

AUTO

ZOOM

OK

MAIN MENU
1:USER PROGRAM

1

1

2

2

2

2

1

1

1,2,3,

1,2,3,

SP. FUNC

AUTO

ZOOM

OK

USER PROGRAM
2:PREHEAT MODE

1

1

2

2

2

2

1

1

1,2,3,

1,2,3,

SP. FUNC

AUTO

ZOOM

OK

PREHEAT MODE
1:30 SEC.

The machine sounds three different types of beep signals: a key
entry beep that sounds when a valid key is pressed, an invalid key
beep that sounds when an invalid key is pressed, and a base setting
beep that sounds when a setting is the same as the base setting
(base settings are explained below). The base setting beep is initially
disabled. If you wish to enable the base setting beep, see "SOUND
AT DEFAULT". If you wish to change the volume of the beep signals
or disable them, see "KEY TOUCH SOUND".

The beep patterns of each type of beep signal are as follows:
Key entry beep: One beep
Invalid key beep: Two beeps

Base setting beep: Three beeps

The base settings are preset standard selections for each copy set-
ting. The base settings are as follows:
Copy ratio: 100%
Light and Dark level: center

Paper feed location: Paper tray
AUTO/TEXT/PHOTO: AUTO