UP-600, UP-700 (serv.man22). UP600-700 Option Installation Manual - Sharp ECR Service Manual (repair manual)

up-600, up-700 (serv.man22) service manual
Model
UP-600 UP-700 (serv.man22)
Pages
11
Size
862.47 KB
Type
PDF
Document
Service Manual
Brand
Device
ECR / UP600-700 Option Installation Manual
File
up-600-up-700-sm22.pdf
Date

Read Sharp UP-600 / UP-700 (serv.man22) Service Manual online

MODEL
UP-600
UP-700
CHAPTER 1. REMOVING THE REAR COVER ............................................... 1
CHAPTER 2. REMOVING THE TOP CABINET............................................... 1
CHAPTER 3. REMOVING THE LCD UNIT ...................................................... 2
CHAPTER 4. REMOVING THE PRINTER UNIT ............................................. 3
CHAPTER 5. REMOVING THE STANDARD DRAWER unit
(For KA, KB version) .................................................................. 4
CHAPTER 6. EXPANSION RAM BOARD : UP-S02MB/04MB ........................ 4
CHAPTER 7. IN-LINE I/F : UP-E10IN .............................................................. 5
CHAPTER 8. MCR UNIT : UP-E13MR............................................................. 5
CHAPTER 9. POLE DISPLAY UNIT : UP-P16DP............................................ 6
CHAPTER 10. RE-232 I/F : ER-A5RS, EFT & RS-232 I/F : ER-01EF ............. 6
CHAPTER 11. HAND SCANNER : ER-A6HS1 ................................................ 7
CHAPTER 12. REMOTE DRAWER : ER-04DW/05DW ................................... 8
CHAPTER 13. RS232DEVICES....................................................................... 8
CHAPTER 14. ONE HOLE CLERK KIT : DKIT-8669BHZZ (For UP-600) ....... 8
CHAPTER 15. DRAWER SEPARATION KIT :
DKIT-3409BHZZ (For KA/KB version) ..................................... 9
CONTENTS
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used 
for after sales service only.
The contents are subject to change without notice.
UP-700
UP-600
CHAPTER 1. REMOVING THE REAR
COVER
1. REMOVING THE REAR COVER
1) Remove the two screws 
.
2) Remove the rear cover 
.
2. REPLACING THE REAR COVER
Install the rear cover in the reverse order of removing.
CHAPTER 2. REMOVING THE TOP
CABINET
1. REMOVING THE TOP CABINET
1) Open the printer cover 
.
2) Lift the pop-up display unit 
.
3) Remove the three screws 
.
1
2
1
1
3
3
2
3
>>>>> USE FONT <<<<<
Helvetica/ Helvetica-Condensed/ Century-Schoolbook/ Symbol & OriginalFonts: (RingWorld2/RingFont2/Pa
Symbol/PartsCod)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4) Slightly lift and slide the top cabinet, and remove the grounding
wire 
.
Note: Do not pull up the top cabinet unit the grounding wire
and connector cables from the top Cabinet are re-
moved.
5) Remove the following cable between the top cabinet and the
main PWB.
Cable 
 between the MAIN PWB and the CKDC PWB.
2. REPLACING THE TOP CABINET
Install the top cabinet in the reverse order of removing.
CHAPTER 3. REMOVING THE LCD
UNIT
1. REMOVING THE LCD UNIT
1) Remove the top cabinet from the bottom cabinet.
2) Remove the LCD flat cable 
 and the earth wire 
 from the
CKDC PWB 
.
3) Remove the two screws 
 from the LCD HINGE 
.
4) Remove the LCD unit from the top cabinet.
Insert a flat-bladed screwdriver into the right and left mounting
areas and remove.
4
4
5
3
1
2
4
5
5) With a flat-bladed screwdriver, remove the two latches of each
of the LCD rear cabinet 
 and the LCD filer 
.
2. REPLACING THE LCD UNIT
Install the LCD unit in the reverse order of removing.
CHAPTER 4. REMOVING THE
PRINTER UNIT
1. REMOVING THE PRINTER UNIT
1) Remove the top cabinet.
2) Remove the two screws 
 fixed on the printer unit.
3) Remove the screw 
 fixed on the earth wire 
.
4) Remove the printer cable 
 from the MAIN PWB( CN    ).
2. REPLACING THE PRINTER UNIT
Install the printer unit in the reverse order of removing
6
7
4
1
1
2
3
Page of 11

Download Sharp UP-600 / UP-700 (serv.man22) Service Manual (Repair Manual)

Here you can read online and download Sharp UP-600 / UP-700 (serv.man22) Service Manual in PDF. UP-600 / UP-700 (serv.man22) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp UP-600 / UP-700 (serv.man22) ECR. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.