Read Sharp UP-600 / UP-700 (serv.man22) Service Manual online
4) Slightly lift and slide the top cabinet, and remove the grounding
wire
.
Note: Do not pull up the top cabinet unit the grounding wire
and connector cables from the top Cabinet are re-
moved.
moved.
5) Remove the following cable between the top cabinet and the
main PWB.
Cable
Cable
between the MAIN PWB and the CKDC PWB.
2. REPLACING THE TOP CABINET
Install the top cabinet in the reverse order of removing.
CHAPTER 3. REMOVING THE LCD
UNIT
1. REMOVING THE LCD UNIT
1) Remove the top cabinet from the bottom cabinet.
2) Remove the LCD flat cable
and the earth wire
from the
CKDC PWB
.
3) Remove the two screws
from the LCD HINGE
.
4) Remove the LCD unit from the top cabinet.
Insert a flat-bladed screwdriver into the right and left mounting
areas and remove.
areas and remove.
4
4
5
3
1
2
4
5
Click on the first or last page to see other UP-600 / UP-700 (serv.man22) service manuals if exist.