Read JBL ON BEAT MICRO (serv.man3) EMC - CB Certificate online
Issue Date:
2012-10-23
Page 33 of 41
Report Reference #
E204594-A37-CB-1
IEC 60950-1:2005
SubClause Difference + Test
Result - Remark
Verdict
This report issued under the responsibility of UL
Minimum cord length is required to be 1.5 m, with
certain constructions such as external power
supplies allowed to consider both input and output
cord lengths into the requirement.
Flexible power supply cords are required to be
compatible with Article 400 of the NEC, and Tables
11 and 12 of the CEC.
3.2.5
Conductors in power supply cords sized
according to NEC and CEC, Part I.
N/A
3.2.5
Power supply cords and cord sets
incorporate flexible cords suitable for the particular
application.
N/A
3.2.6
Strain relief provided for non-detachable
interconnecting cables not supplied by a limited
power source.
N/A
3.2.9
Adequate wire bending space and volume
of field wiring compartment required to properly
make the field connections.
N/A
3.2.9
Equipment intended solely for installation in
Restricted Access Locations using low voltage d.c.
systems may not need provision for connecting and
securing a field wiring system. A method of
securing wiring or instructions provided to ensure
the wiring is protected from abuse.
N/A
3.3
Field wiring terminals provided for
interconnection of units for other than LPS or Class
2 circuits also comply with 3.3.
Class III equipment, no
wiring terminal provided.
N/A
3.3
Interconnection of units by LPS or Class 2
conductors may have field wiring connectors other
N/A
Click on the first or last page to see other ON BEAT MICRO (serv.man3) service manuals if exist.