Read JBL ON BEAT MICRO (serv.man3) EMC - CB Certificate online
Issue Date:
2012-10-23
Page 32 of 41
Report Reference #
E204594-A37-CB-1
IEC 60950-1:2005
SubClause Difference + Test
Result - Remark
Verdict
This report issued under the responsibility of UL
connection and earthing electrode connection.
3.2.1.2
Special markings and instructions for
equipment with provisions to connect earthed
conductor of a DC supply circuit to earthing
conductor at the equipment.
N/A
3.2.1.2
Special markings and instructions for
equipment with earthed conductor of a DC supply
circuit connected to the earthing conductor at the
equipment.
N/A
3.2.1.2
Terminals and leads provided for
permanent connection of DC powered equipment
to supply marked to indicate polarity if reverse
polarity may result in a hazard.
N/A
3.2.3
Permanently connected equipment has
provision for connecting and securing a field wiring
system (i.e. conduit, or leads etc.) per the NEC and
CEC, Part 1.
N/A
3.2.3
Permanently connected equipment may
have terminals or leads not smaller than No. 18
AWG (0.82 mm²) and not less than 150 mm in
length for connection of field installed wiring.
N/A
3.2.3
If supply wires exceed 60 °C, marking
indicates use of 75 °C or 90 °C wiring for supply
connection as appropriate.
N/A
3.2.3
Equipment compatible with suitable trade
sizes of conduits and cables.
N/A
3.2.5
Power supply cords are required to be no
longer than 4.5 m in length.
N/A
Click on the first or last page to see other ON BEAT MICRO (serv.man3) service manuals if exist.