Read JBL ON BEAT MICRO (serv.man3) EMC - CB Certificate online
Issue Date:
2012-10-23
Page 35 of 41
Report Reference #
E204594-A37-CB-1
IEC 60950-1:2005
SubClause Difference + Test
Result - Remark
Verdict
This report issued under the responsibility of UL
3.4.2
Separate motor control device(s) required
for cord-connected equipment rated more than 12
A, or with motor rated more than 1/3 hp or more
than 120 V.
N/A
3.4.8
Vertically mounted disconnect devices
oriented so up position of handle is "on".
N/A
3.4.11
For computer-room applications, equipment
with battery systems capable of supplying 750 VA
for 5 min require battery disconnect means.
N/A
4.2.8.1
Special opening restrictions for enclosures
around CRTs with face dimension of 160 mm or
more.
N/A
4.2.9
Compartment housing high-pressure lamp
marked to indicate risk of explosion.
N/A
4.2.11
For equipment intended for mounting on
racks and provided with slide/rails allowing the
equipment to slide away from the rack for
installation, service and maintenance, additional
construction, performance and marking
requirements are applicable to determine the
adequacy of the slide/rails.
N/A
4.3.2
Loading test for equipment with handle(s)
used to support more than 9 kg tested at four times
the weight of the unit.
N/A
4.3.6
In addition to the IEC requirements, Direct
Plug-in Equipment complies with UL 1310 or CSA
223 mechanical assembly requirements.
N/A
4.3.12
N/A
Click on the first or last page to see other ON BEAT MICRO (serv.man3) service manuals if exist.