Read Harman Kardon HK 970 (serv.man13) EMC - CB Certificate online
Page 16 of 66
Report No.: HK-R04173361
IEC 60065 / EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No: IECEN60065D
Intertek Testing Services Hong Kong Ltd.
2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong.
Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com
14 COMPONENTS
14.1
Resistors
a) Resistors between hazardous live parts and
accessible metal parts
accessible metal parts
No such component
N
a) Resistors separately approved
………………….:
………………….:
N
b) Resistors, other than between hazardous live
parts and accessible parts
parts and accessible parts
R901 (Open and short circuit
does not affect safety issue)
does not affect safety issue)
N
b) Resistors separately approved ......................... : N
14.2
Capacitors and RC units
Capacitors separately approved
P
14.2.1
Y capacitors tested to IEC 60384-14, 2
nd
edition .. : No such component
N
14.2.2
X capacitors tested to IEC 60384-14, 2
nd
edition .. : C902, C903
(X2 capacitors used)
C901 (Y2 capacitor used)
P
14.2.3
Capacitors operating at mains frequency but not
connected to the mains: tests for X2 ..................... :
connected to the mains: tests for X2 ..................... :
No such capacitor
N
14.2.5
Capacitors with volume exceeding 1750 mm³,
where short-circuit current exceeds 0,2 A:
compliance with IEC60384-1, 4.38 category B or
better ..................................................................... :
where short-circuit current exceeds 0,2 A:
compliance with IEC60384-1, 4.38 category B or
better ..................................................................... :
No such capacitor
N
Capacitors with volume exceeding 1750 mm³,
mounted closer to a potential ignition source than
table 5 permits: compliance with IEC 60 384-1,
4.38 category B or better ....................................... :
mounted closer to a potential ignition source than
table 5 permits: compliance with IEC 60 384-1,
4.38 category B or better ....................................... :
N
Shielded by a barrier to V-0 or metal .................... :
N
14.3
Inductors and windings
Comply with IEC 61558-1, IEC 61558-2
(as relevant) and clause 20.1.4
(as relevant) and clause 20.1.4
Tested with appliance
Noted
Click on the first or last page to see other HK 970 (serv.man13) service manuals if exist.