Read Sony SAL70200G2 Service Manual online
2-16
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
HELP25
1. Affix the FH flexible setting tape and MR sensor setting tape to the indicated portion of FH flexible PC board.
2. Affix the FH flexible setting tape to the indicated portion of front holding tube.
3. Affix the FH flexible PC board to the front holding tube, referring to the affixing reference.
2. Affix the FH flexible setting tape to the indicated portion of front holding tube.
3. Affix the FH flexible PC board to the front holding tube, referring to the affixing reference.
FH Flexible Setting Tape
FH Flexible Setting Tape
FH Flexible PC board
Align the edges
with the stair.
with the stair.
Front Holding Tube
Front Holding Tube
MR Sensor Setting Tape
FH Flexible PC board
HELP26
1. Affix the DV encoder flexible PC board to the front holding barrel along the affixing reference as shown in the figure below.
Front Holding
Barrel
Barrel
Front Holding
Barrel
Barrel
DV Encoder Flexible
PC Board
PC Board
DV Encoder Flexible
PC Board
PC Board
DV Encoder Flexible
PC Board
PC Board
Align the leading edge flexible
board with the corner crossed
by two arrow lines.
board with the corner crossed
by two arrow lines.
Do not peel off the detached
sheet on the flexible board at
the upper side above the line
at this moment.
sheet on the flexible board at
the upper side above the line
at this moment.
Affix the flexible board,
leaving the curve at four corners.
leaving the curve at four corners.
Click on the first or last page to see other SAL70200G2 service manuals if exist.