Read Sony SAL70200G2 Service Manual online
2-18
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
HELP30
1. Install the pressure plate, facing the curved side to the sheet.
2. Assemble the spring, facing the burr side down and the curved side up.
2. Assemble the spring, facing the burr side down and the curved side up.
Spring
Pressure
Plate
Plate
Cut view
Cut view
Curved side
Curved side
Sheet (Black)
Sheet (PETP)
Sheet (White)
Sheet (PETP)
Sheet (White)
Burr side
HELP31
1. Cut the aluminum tape in the specified size and affix it to the flexible PWB of stator.
Note:
Do not touch the area indicated in the figure.
2. In addition, cut the polyester tape in the specified size and affix it to the flexible card of stator.
3. Solder the harness as shown in the figure.
4. Moreover, cut the polyester tape in the specified size and affix it.
3. Solder the harness as shown in the figure.
4. Moreover, cut the polyester tape in the specified size and affix it.
Note:
If the width of polyester tape is not enough, use two sheets of polyester tape.
Be careful
not to touch
not to touch
Stator
Stator
Stator
Harness
(Blue)
(Blue)
Harness
(Yellow)
(Yellow)
Harness
(Black)
(Black)
Soldering
Flexible PWB
Flexible PWB
Aluminum tape
(5X40mm)
(5X40mm)
Aluminum tape
(5X40mm)
(5X40mm)
Polyester tape
(9X30mm)
(9X30mm)
Polyester tape
(9X30mm)
(9X30mm)
Polyester tape
(12X17mm)
(12X17mm)
Polyester tape
(12X17mm)
(12X17mm)
Click on the first or last page to see other SAL70200G2 service manuals if exist.