Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
Apply the adhesive bond (B-40)
(Screw hole)
(Screw hole)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Outer Tube
Bearing
Bearing
Cut portion
Cut portion
Bearing
Outer Tube
Hole A
Hole A
Washer
Washer
Bearing
Bearing
Cam Ring Hold Pin
Focus Cam Ring
Spring Support Pin
Rotate the focus
cam ring
cam ring
Cam Ring Hold Pin
Grooves
Grooves
Focus Cam
Ring
Ring
HELP36
Adhesive bond (B-40): J-6082-614-A
1.
Apply adhesive bond (B-40) to the cam ring hold pin installation hole (screw hole) at six locations.
2.
Align the cut portion of outer tube with the cut portion of focus cam ring as shown below.
Install the focus cam ring, engaging the bearing of outer tube with the groove of focus cam ring at six locations.
3.
Install the cam ring hold pin, bearing and washer through the hole A of focus cam ring at three locations.
4.
Rotate the focus cam ring in the arrow direction and install the cam ring hold pin, bearing and washer.
5.
Apply two drops of adhesive bond (B-40) to the tips of three spring support pins and tighten three spring support pins.
Click on the first or last page to see other SAL300F28G service manuals if exist.