Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP38
1.
Fold the MR connect flexible once as shown in the figure A and affix the flexible substrate tape A to it.
Then, affix the MR connect flexible to the outer tube.
2.
Affix the flexible substrate tape B to the indicated portion of outer tube as shown in the figure B.
3.
Fold the DV encoder flexible once as shown in the figure C and affix the flexible substrate tape A and flexible substrate tape C to it.
Then, affix the DV encoder flexible to the outer tube.
Figure A
Figure C
Figure B
MR connect flexible
Affixing reference
Affixing
reference
reference
Affixing
reference
reference
Affix along
the right edge.
(Riding-over is not allowed.)
the right edge.
(Riding-over is not allowed.)
Align the over-hang portion
with the installation position
of “MR sensor base plate block” or
“MR sensor unit”
with the installation position
of “MR sensor base plate block” or
“MR sensor unit”
Affixing
reference
reference
Location to be folded
(crest-fold)
(crest-fold)
Location to be folded
(crest-fold)
(crest-fold)
MR Connect Flexible
DV Encoder Flexible
DV Encoder Flexible
DV Encoder Flexible
Flexible Substrate Tape A
Flexible Substrate Tape A
Flexible Substrate
Tape A
Tape A
Flexible Substrate
Tape A
Tape A
Flexible Substrate Tape B
Flexible Substrate Tape B
Flexible Substrate Tape B
MR Connect Flexible
Stopper pin installation
hole
hole
Align the stopper
pin installation hole.
pin installation hole.
Affix along the groove.
(Riding-over is not allowed.)
(Riding-over is not allowed.)
Outer Tube
Outer Tube
Flexible Substrate
Tape C
Tape C
Flexible Substrate Tape C
Click on the first or last page to see other SAL300F28G service manuals if exist.