Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
4.
Solder two harnesses (green/black) to the DV encoder flexible.
5.
Cut two sheets of polyester tape in 20mm length and affix them to cover the area 12x20mm so that four harnesses are fixed as shown
in the figure.
6.
Solder the MR connection flexible of MR sensor base plate block to the DV encoder flexible.
7.
Cut two sheets of polyester tape in20mm length and affix them to cover the area 12x20mm so that the MR sensor base plate block is
fixed.
DV Encoder
Flexible
Flexible
DV Encoder Flexible
MR connect flexible
Polyester Tape
(9X20mm)
(9X20mm)
Polyester Tape
(9X20mm)
(9X20mm)
20mm
20mm
12mm
12mm
MR Sensor Base Plate
Block
Block
Solder
MR connect flexible
Harness (Black)
Harness (Green)
(Leading from MF Detection
Switch Block)
Switch Block)
(From the FH Flexible)
Harness (Grey)
Harness (Orange)
Click on the first or last page to see other SAL300F28G service manuals if exist.