Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP31
Adhesive bond (B-10):
J-6082-612-A
Adhesive bond (B-40):
J-6082-614-A
1.
Install the MF detection switch block to the outer tube. Apply two drops of adhesive bond (B-40) to the tips of two screws and tighten
the MF detection switch block with two screws.
2.
Install the MR sensor base plate block to the outer tube and tighten two screws tentatively.
3.
After performing the MR waveform inspection of [5-8. HALF COMPLETION INSPECTION], apply the adhesive bond (B-10) to the
heads of two screws.
Apply the adhesive bond (B-10)
Apply the adhesive
bond (B-40)
bond (B-40)
MR Sensor Base Plate Block
After finishing the
MR waveform inspection
MR waveform inspection
MR Sensor Base Plate Block
MF Detection
Switch Block
Switch Block
Outer
Tube
Tube
Click on the first or last page to see other SAL300F28G service manuals if exist.