Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP34
Adhesive bond (B-40):
J-6082-614-A
1.
Align two harnesses of mirror tube (B) block with the cut portion A of outer tube as shown in the figure below and install the Mirror
Tube (B) Block to the outer tube.
Note:
Free two harnesses of mirror tube (B) block from the cut portion B of outer tube.
2.
Apply two drops of adhesive bond (B-40) to the tips of six screws and tighten the mirror tube (B) block with six screws.
3.
Solder two harnesses (leading from the FH flexible ) to the indicated portion of DV encoder flexible.
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
Mirror Tube (B) Block
Cut portion A
Cut portion B
Solder
Cut portion B
Outer Tube
DV Encoder
Flexible
Flexible
DV Encoder
Flexible
Flexible
Harness (Grey, Orange)
(From the FH flexible)
(From the FH flexible)
Harness (Grey, Orange)
(From the FH flexible)
(From the FH flexible)
(From the FH flexible)
Harness (Grey)
Harness (Orange)
Click on the first or last page to see other SAL300F28G service manuals if exist.