Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP15
Adhesive bond (B-40): A-6082-614-A
1.
Bridge-solder the harness (pink) leading from the connection box block to two leads of IC (See the figure below) on the DC-DC pc
board block (B side).
2.
Apply two drops of adhesive bond (B-40) to the tips of two screws.
3.
Fix the DC-DC pc board block with two screws.
4.
Solder two harnesses (black/red) leading from the connection box block and three harnesses (blue/black/yellow) to the DC-DC pc
board block (A side).
Harness (Pink)
(From the connection
box block)
(From the connection
box block)
Harness (Pink)
(From the connection
box block)
(From the connection
box block)
Harness (Red)
Harness (Black)
Harness (Black)
Harness (Blue)
Harness (Yellow)
(From the
connection
box block)
connection
box block)
(From the stator)
Bridge-solder two leads of IC.
DC-DC
PC Board
Block
PC Board
Block
DC-DC
PC Board
Block
PC Board
Block
DC-DC PC Board Block
(Side A)
DC-DC PC Board Block
(Side B)
Apply the adhesive
bond (B-40)
bond (B-40)
Click on the first or last page to see other SAL300F28G service manuals if exist.