Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP20
Adhesive bond (B-10): J-6082-612-A
After performing the [5-2. APERTURE DIAMETER CHECK/ADJUSTMENT], apply the adhesive bond (B-10) to the indicated portion.
HELP21
Adhesive bond (B-40): J-6082-614-A
1.
Thread the DV encoder flaxible and the MR connection flaxible through the hole of connect barrel and install the connect barrel.
2.
Apply two drops of adhesive bond (B-40) to the tips of six screws and fix the connect barrel with six screws.
3.
Affix two sheets of flexible substrate tape H to the indicated portion of connect barrel.
4.
Affix the DV encoder flexible and the MR connection flaxible to the flexible substrate tape H from the hole of connect barrel.
Apply the adhesive bond (B-10)
Apply the adhesive bond (B-10)
Apply the adhesive
bond (B-10)
bond (B-10)
Apply the adhesive
bond (B-10)
bond (B-10)
Aperture Operate Plate
Apply the adhesive bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
DV Encoder Flexible
Connect Barrel
Flexible Substrate Tape H
Holes
MR Connection
Flaxible
Flaxible
Click on the first or last page to see other SAL300F28G service manuals if exist.