Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP18
1.
Solder the Harness (Pink) to the flexible BL PWB.
2.
Affix the flexible BL PWB to the cut portion (near filter hole) of bore of aperture inner barrel.
3.
Cut two polyester tapes (black) 10mm in 28mm length and affix them to cover the area of 20 x 28mm.
HELP19
Adhesive bond (B-40): J-6082-614-A
Apply two drops of adhesive bond (B-40) to the substrate hold pin C and the tips of four screws.
Filter Hole
Route the flexible
BL PWB along
the upper end
of aperture
inner barrel
BL PWB along
the upper end
of aperture
inner barrel
Adjust the parallel
position to be equal
at right and left sides.
position to be equal
at right and left sides.
Flexible BL PWB
Flexible BL PWB
Flexible BL PWB
20
mm
mm
28mm
Affix two sheets of polyester tape (black)
10mm to meet the shape of bore groove.
Affix together with the harness.
10mm to meet the shape of bore groove.
Affix together with the harness.
Flexible BL PWB
Solder
Harness (Pink)
Polyester Tape (Black)
10mm (10X28mm)
10mm (10X28mm)
Polyester Tape (Black)
10mm (10X28mm)
10mm (10X28mm)
Flexible
Substrate
G Tape
Substrate
G Tape
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Substrate Hold Pin C
Substrate Hold Pin B
Substrate Hold Pin B
Substrate Hold Pin D
MM PC Board Unit
DM PC Board Unit
Click on the first or last page to see other SAL300F28G service manuals if exist.