Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP11
Adhesive bond (B-10):
J-6082-612-A
Adhesive bond (B-40):
J-6082-614-A
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or the equivalent.
Do not use the instant glue, which becomes white after dried.
1.
Install the aperture connect lever to the iris holding tube block. Apply two drops of adhesive bond (B-40) to the tips of two screws
and tighten the aperture connect lever with two screws.
2.
Apply the adhesive bond (LOCTITE 460) the indicated portion of iris holding tube block and affix the mount index there.
3.
Install the main spring hook to the iris holding tube block and tighten it with the screw. Then, apply the adhesive bond (B-10) as
indicated in the figure.
4.
Install the main spring as shown in the figure and apply the adhesive bond (B-10) to the indicated portion.
Apply the adhesive
bond (LOCTITE 460)
bond (LOCTITE 460)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-10)
bond (B-10)
Apply the adhesive
bond (B-10)
bond (B-10)
Iris Holding Tube Block
Aperture Connect Lever
Aperture Connect Lever
Main Spring Hook
Main Spring Hook
Main Spring
Main Spring
Main Spring
Mount Index
Click on the first or last page to see other SAL300F28G service manuals if exist.