Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP16
Cut the polyester tape in 30mm length and affix it to the indicated portion of aperture inner barrel.
HELP17
Adhesive bond (B-40): J-6082-614-A
1.
Install the aperture inner barrel, aligning the flexible card freeing part of connect barrel with the flexible card freeing part of aperture
inner barrel block.
Note:
Draw out the flexible cards of DV encoder flaxible and MR connection flaxible from the flexible card freeing part of
aperture inner barrel.
2.
Apply two drops of adhesive bond (B-40) to the tips of six screws and tighten the aperture inner barrel with six screws.
Cut hole
Cut hole
Aperture Inner
Barrel
Barrel
Polyester Tape
9mm (9X30mm)
9mm (9X30mm)
Polyester Tape
9mm (9X30mm)
9mm (9X30mm)
30mm
9mm
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the adhesive
bond (B-40)
bond (B-40)
Aperture Inner Barel
Block
Block
Aperture Inner Barel
Flexible card
freeing part
freeing part
Flexible card
freeing part
freeing part
MR Connection
Flaxible
Flaxible
MR Connection
Flaxible
Flaxible
DV Encoder Flaxible
DV Encoder
Flaxible
Flaxible
Connect Barrel
Click on the first or last page to see other SAL300F28G service manuals if exist.