Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
HELP07
Universal wrench:
J-6082-609-A
Chip A for universal wrench:
J-6082-609-1
Chip B for universal wrench:
J-6082-609-2
Adhesive bond (B-10):
J-6082-612-A
Tighten the filter holder and apply the adhesive bond (B-10) to the indicated portion.
Note:
When removing or installing, use the universal wrench.
HELP08
Adhesive bond (B-40): J-6082-614-A
1.
Install the rear light shield barrel. Apply two drops of adhesive bond (B-40) to the tips of three screws and tighten the rear light shield
barrel with three screws.
2.
Install the connection box block. Apply two drops of adhesive bond (B-40) to the tips of two screws and tighten the rear light shield
barrel with three screws.
Filter Holder
Filter Holder
Filter
Filter
Front Lens Barrel A
Front Lens Barrel A
Apply the adhesive bond (B-10).
(3 location on the circumference
with 30mm width)
(3 location on the circumference
with 30mm width)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Connection Box Block
Rear Light
Shield Barrel
Shield Barrel
Click on the first or last page to see other SAL300F28G service manuals if exist.