DSLR-A100, DSLR-A100H, DSLR-A100K, DSLR-A100W (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 38

6-36

DSLR-A100_ADJ

Light Source-A (Refer to Light source-A maintenance.)
Light balance filter LB200
Master body
AE master lens
PC with preinstalled the DSLR-A100 adjustment program
USB cable
AC adaptor/charger (AC-VQ900AM)
All white chart

1. Set Master body to adjustment mode.

Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.

2. Set the camera and the measuring instrument as shown on the Fig.1.
3. Click “WB” of the adjustment menu.
4. Click “MASTER” of WB adjustment menu.
5. Click “OK” after setting light source-A, according to the displayed information.

The adjustment is automatically started.

6. Click “OK” after setting light source-C, according to the displayed information. (Fig. 2)

The adjustment is automatically started.

7. “OK” is displayed on the adjustment menu, then reading data is complete.
8. Click “ADJUSTMENT END”
9. Exchange Master camera for target camera.

Be careful to exchange camera to avoid any change to the setting.

10. Set camera to adjustment mode.

Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.

11. Click “WB” of the adjustment menu.
12. Click “ADJUSTMENT” of WB Adjustment menu.
13. “Does it adjust?” is displayed in the window, then click “YES”.
14. Click “OK” after setting light source-A, according to the displayed information.

The adjustment is automatically started.

15. Click “OK” after setting light source C, according to the displayed information. (Fig. 2)

The adjustment is automatically started.

16. The adjustment is completed when “OK” is displayed on the adjustment menu.

AE master lens

Light Source-A

Refer to Light source-A maintenance

All white chart

The chart must appear on the entire picture frame.

Light balance filter LB200