DSLR-A100, DSLR-A100H, DSLR-A100K, DSLR-A100W (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 37

6-35

DSLR-A100_ADJ

955 

±

 2 mm

Back ground paper

The chart must appear on the entire picture frame.

Lens mount surface

Adjust the dispersion of photometric device to the built-in flash.
This adjustment should be performed in a dark room.

Back ground paper (Size: 30 cm x 42 cm or larger)
PC with preinstalled the DSLR-A100 adjustment program
AE master lens
USB cable
AC adaptor/charger (AC-VQ900AM)

Lens mount surface to Back ground paper = 955 

± 2 mm

1. Pop up the flash lamp of the camera, and set the camera and chart as shown in Fig. 1.
2. Set camera to adjustment mode.

Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.

3. Click “BI FLASH” of the adjustment menu.
4. “Does it adjust?” appears. Click “YES”.
5. Repeating the flash of flash lamp, automatic adjustment is taken place. (The lamp will flash about 15 times.)
6. “BI FLASH adjustment has completed!” appears when adjustment is completed.