Read Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual online
6-33
DSLR-A100_ADJ
20.
Check / Adjustment of the AE (AE)
Required equipment
Luminance box
AE master lens
PC with preinstalled the DSLR-A100 adjustment program
USB cable
AC adaptor/charger (AC-VQ900AM)
AE master lens
PC with preinstalled the DSLR-A100 adjustment program
USB cable
AC adaptor/charger (AC-VQ900AM)
Procedure of the Check
1. Set the camera to the adjsutment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
Attach the AE mater lens to the camera, and then set to the adjustment mode.
Confirm that the aperture value is not indicated as “--” on the LCD of the camera.
Attach the AE mater lens to the camera, and then set to the adjustment mode.
Confirm that the aperture value is not indicated as “--” on the LCD of the camera.
2. Click “AE” of the adjustment menu. “Please select menu” appears.
3. Click “CHECK”.
4. Set the value of brightness box by following the direction as “Please set light box as EV**”, and then click “OK”.
5. Measument value is displayed as shown in Fig. 1. Click “OK”.
6. Follow the direction and repeat step 4 and 5.
7. “AE adjustment has completed!” appears when completed.
3. Click “CHECK”.
4. Set the value of brightness box by following the direction as “Please set light box as EV**”, and then click “OK”.
5. Measument value is displayed as shown in Fig. 1. Click “OK”.
6. Follow the direction and repeat step 4 and 5.
7. “AE adjustment has completed!” appears when completed.
Procedure of the Adjustment
1. Set the camera to the adjsutment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
Attach the AE mater lens to the camera, and then set to the adjustment mode.
Confirm that the aperture value is not indicated as “--” on the LCD of the camera.
Attach the AE mater lens to the camera, and then set to the adjustment mode.
Confirm that the aperture value is not indicated as “--” on the LCD of the camera.
2. Click “AE”of the adjustment menu. “Please select menu” appears.
3. Click “ADJUST”. “Does it adjust?” appears.
4. Click “YES”. “Please set light box as EV6” appears.
5. Set the value of Luminance box accordingly, and then click “OK”.
3. Click “ADJUST”. “Does it adjust?” appears.
4. Click “YES”. “Please set light box as EV6” appears.
5. Set the value of Luminance box accordingly, and then click “OK”.
“Please set light box as EV15” appears.
6. Set the value of Luminance box accordingly, and then click “OK”.
7. Set the value of Luminance box by following the direction as “Please set light box as EV**”, and then click “OK”.
8. Measument value is displayed as shown in Fig. 1. Click “OK”.
9. Follow the direction and repeat step 7 and 8.
10. “AE adjustment has completed!” appears when completed.
7. Set the value of Luminance box by following the direction as “Please set light box as EV**”, and then click “OK”.
8. Measument value is displayed as shown in Fig. 1. Click “OK”.
9. Follow the direction and repeat step 7 and 8.
10. “AE adjustment has completed!” appears when completed.
Fig. 2
Fig. 1
Luminance box
During the adjustment, cover the
luminance surface and body with
a blackout curtain, etc. for shielding.
luminance surface and body with
a blackout curtain, etc. for shielding.
Click on the first or last page to see other DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) service manuals if exist.