Read Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Link
Link
To activate without exterior parts
Required adjustment, setting and confirmation
items after repairing (exchanging parts)
items after repairing (exchanging parts)
Related adjustment and required setting items
List of service tools
Before starting adjustments
OSD LANGUAGE SETUP
ERROR CODE ON ADJUSTMENT PROGRAM
VIDEO SYSTEM ADJUSTMENTS
LCD SYSTEM ADJUSTMENTS
CAMERA SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
ADJUSTMENTS
FLASH LEVEL SHIFT
LIGHT SOURCE-A MAINTENANCE
LCD ALL SEGMENT ON
CAMERA LOG
SERVICE MODE
Sony EMCS Co.
Auto-ADJ
DSLR-A100_ADJ
SCREEN DUST
STANDARD
SETTING OF PHOTOSHOP
CONDITION OF MEASURE AND APPRECIATION
CHECK LIST
DSLR-A100
Ver. 1.3 2007.10
9-852-130-53
• Use this Service Manual together with the DSLR-A100 Adjustment Program (DSLRadj_cs.exe).
• Preparing the DSLR-A100 adjustment program
• Precaution on Replacing the AM-001 Board
• Precaution on Replacing the AM-001 Board
2007J0500-1
© 2007.10
Published by Kohda TEC
— 2 —
DSLR-A100_ADJ
TABLE OF CONTENTS
Section
Title
Page
6.
ADJUSTMENTS
Before Starting Adjustments ····················································· 6-1
1. To Activate without Exterior Parts ········································ 6-2
2. Required Adjustment, Setting and Confirmation Items after
1. To Activate without Exterior Parts ········································ 6-2
2. Required Adjustment, Setting and Confirmation Items after
Repairing (Exchanging Parts) ··············································· 6-3
3. Related Adjustment and Required Setting Items ·················· 6-5
4. List of Service Tools ····························································· 6-6
4. List of Service Tools ····························································· 6-6
6-1. Adjustments ······································································· 6-8
1-1. Preparations Before Adjustments ······································· 6-8
1-2. Camera System Adjustments ··········································· 6-14
1-3. Video System Adjustments ·············································· 6-38
1-4. LCD System Adjustments ················································ 6-40
1-5. OSD Language Setup ······················································· 6-42
1-6. Error Code on Adjustment Program ································ 6-43
1-1. Preparations Before Adjustments ······································· 6-8
1-2. Camera System Adjustments ··········································· 6-14
1-3. Video System Adjustments ·············································· 6-38
1-4. LCD System Adjustments ················································ 6-40
1-5. OSD Language Setup ······················································· 6-42
1-6. Error Code on Adjustment Program ································ 6-43
6-2. Service Mode ··································································· 6-50
2-1. Camera Log ······································································ 6-50
2-2. LCD All Segment ON ······················································ 6-52
2-3. Flash Level Shift ······························································ 6-52
2-4. Light Source-A Maintenance ··········································· 6-53
2-1. Camera Log ······································································ 6-50
2-2. LCD All Segment ON ······················································ 6-52
2-3. Flash Level Shift ······························································ 6-52
2-4. Light Source-A Maintenance ··········································· 6-53
6-3. Check List ········································································ 6-54
3-1. Condition of Measure and Appreciation ·························· 6-54
3-2. Setting of Photoshop ························································ 6-55
3-3. Screen Dust ······································································ 6-56
3-4. Standard ··········································································· 6-57
3-1. Condition of Measure and Appreciation ·························· 6-54
3-2. Setting of Photoshop ························································ 6-55
3-3. Screen Dust ······································································ 6-56
3-4. Standard ··········································································· 6-57
*
The AF assist chart is shown on page 6-64.
6-1
DSLR-A100_ADJ
SECTION 6
ADJUSTMENTS
Before starting adjustments
Precaution on Replacing the AM-001 Board
When the AM-001 board was replaced, perform “Firmware Rewriting” and then make all adjustments, and finally
perform “OSD Language Setup”.
perform “OSD Language Setup”.
Firmware Rewriting
Note 1:
Use the AC adapter or fully charged battery whenever rewriting the firmware.
Do not remove the battery or AC adapter while the Access lamp is lighting.
Otherwise, the firmware update from the CF card will fail.
Do not remove the battery or AC adapter while the Access lamp is lighting.
Otherwise, the firmware update from the CF card will fail.
1. Copy all files in the “System” folder in the “DSLR-A100 Firmware CD” to the route directory of the CF card.
2. Turn off the POWER switch of the camera, and insert the “Firmware Update” CF in the camera.
3. Set the AC adapter (battery).
4. Turn on the POWER switch while pressing the Lens Remove button.
5. After the Access lamp turns on, release the Lens Remove button, and the firmware update from the CF card will
2. Turn off the POWER switch of the camera, and insert the “Firmware Update” CF in the camera.
3. Set the AC adapter (battery).
4. Turn on the POWER switch while pressing the Lens Remove button.
5. After the Access lamp turns on, release the Lens Remove button, and the firmware update from the CF card will
start.
6. In about 2 minutes, the access lamp will turn off or blink to indicate that the update has completed.
Note 2:
As the camera does not operate when the firmware update completed, remove and install the battery.
6-2
DSLR-A100_ADJ
1.
To activate without exterior parts
Short-circuit the pattern-A of FP-528 flexible board with solder.
When using replacement FP-528 flexible board, no need to short these patterns because it has pattern-B.
When using replacement FP-528 flexible board, no need to short these patterns because it has pattern-B.
Note:
Before installing BACK COVER ASSY, be sure to unsolder the pattern-A or to cut the pattern-B.
Pattern-A
FP-528 flexible board
Pattern-B
Cut
