Read Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual online
6-26
DSLR-A100_ADJ
14.
FLATNESS Adjustment
Procedure of the adjustment
1. Set camera to adjustment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
2. Set the camera and the measuring instrument as in Fig.1.
3. Set the brightness of the luminance box to EV 8.
4. Click “FLATNESS” of the adjustment menu. “Does it adjust?” appears.
5. Click “YES” and then click “START”. Automatic adjustment starts.
6. “OK” appears when adjustment is completed. (Fig. 2)
3. Set the brightness of the luminance box to EV 8.
4. Click “FLATNESS” of the adjustment menu. “Does it adjust?” appears.
5. Click “YES” and then click “START”. Automatic adjustment starts.
6. “OK” appears when adjustment is completed. (Fig. 2)
* Select the island and wave form after the flatness adjustment enables dust check.
15.
EZ Check / Adjustment
Preparation of the EZ Check / adjustment
Set up the camera, chart and lighting as in Fig.1.
Fig. 1
Fig. 1
Fig. 2
Luminance box
AF master lens
Lens mount surface
Inverter type
fluorescent lamp
fluorescent lamp
Setting for EZ check and adj.
AF chart
I
,
II
AF chart
II
AF chart
I
1,955 mm
CAMERA
Focus mode: MF
Click on the first or last page to see other DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) service manuals if exist.