Read Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual online
6-24
DSLR-A100_ADJ
12.
AF Area Adjustment
Adjustment
1. Set up the equipment as in Fig. 1.
2. Set the camera to the adjsutment mode.
2. Set the camera to the adjsutment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
3. Click “AF”of the adjustment menu. “Does it adjust?” appears.
4. Click “YES”. “Please select menu” appears.
5. Click “AREA” and then click “START”. Automatic adjustment starts and displays waveform and readings.
4. Click “YES”. “Please select menu” appears.
5. Click “AREA” and then click “START”. Automatic adjustment starts and displays waveform and readings.
Check that each line has two dents like the ones in Fig. 2, and the readings X0 and Y0 are within the standard. If Y0 reading is beyond
the standard, follow the adjustment procedure below.
the standard, follow the adjustment procedure below.
6. Adjust the sub-mirror position as in Fig. 3.
7. After completion of adjustment, click “STOP” and then “END”.
7. After completion of adjustment, click “STOP” and then “END”.
Fig. 1
Fig. 2
Fig. 3
Standard X0: 0
± 0.35 mm (check only)
Y0: 0
± 0.2 mm
AF master lens
Lens mount surface
Align center of each island with the chart.
AF chart
III
AF chart
III
1,955 mm
CAMERA
Focus mode: MF
Sub-mirror
Adjusting Screw
Adjusting Screw
Click on the first or last page to see other DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) service manuals if exist.