DSLR-A100, DSLR-A100H, DSLR-A100K, DSLR-A100W (serv.man3) - Sony Digital Camera Service Manual (repair manual). Page 27

6-25

DSLR-A100_ADJ

1. Set camera to adjustment mode.

Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.

2. Set up the equipment as in Fig. 1.
3. Set the brightness of Luminanc box to EV10.
4. Attach AF-Y/P Adjuster to the camera, and set Pitch Adjusting Plate as in Fig. 1.
5. Click “AF” of the adjustment menu. “Does it adjust?” appears.
6. Click “YES”. “Please select menu” appears.
7. Click “PITCH/YAW” and then click “PITCH”.  Automatic adjustment starts.
8. Adjust the Pitch Adjusting Screw (Fig. 3) so that the reading (Fig. 2) is within the standard.

If not, follow the adjustment procedure below.

9. If the reading is within the standard, click “STOP”.

10. Attach AF-Y/P Adjuster to the camera, and set Yaw Adjusting Plate as in Fig. 1.
11. Click “YAW”.  Automatic adjustment starts.
12. Adjust the Yaw Adjusting Screw (Fig. 3) so that the reading (Fig. 2) is within the standard.
13. If the reading is within the standard, click “STOP”. Perform PITCH adjustment again.
14. Check that the readings are within the standard by repeating PITCH and YAW adjustment.

Item

Standard

Pitch

0.77 – 1.30

Yaw

0.73 – 1.37

Luminance box

Insert the plate 
unit it stops.

Pitch Adjusting Plate

AF-Y, P adjuster

Yaw Adjusting Plate

Insert the plate 
unit it stops.

Yaw Adjusting 

Screw

Pitch Adjusting 
Screw

(Yaw)

(Pitch)

Adjust so that there is no difference in waveform 
between left and right side of screen.