Read Sony DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) Service Manual online
6-27
DSLR-A100_ADJ
16.
EZ Adjustment
Note:
Be sure to perform the adjustment for all island groups in series according to the display after replacing CCD UNIT.
Procedure of the adjustment
1. Set up the equipment (Refer to “Preparation of the EZ Check / adjustment”).
2. Set the camera to the adjustment mode.
2. Set the camera to the adjustment mode.
Refer to “Starting up the DSLR-A100 adjustment program (in the adjustment mode)”.
3. Click “EZ” of the adjustment menu. “Please select menu” appears.
4. Click “ADJUST”.
5. “Does it adjust?” appears. Click “YES”.
6. “Adjust <3, 4, 6 ISLAND> Please set chart position as < A >” appears. (Fig. 1)
4. Click “ADJUST”.
5. “Does it adjust?” appears. Click “YES”.
6. “Adjust <3, 4, 6 ISLAND> Please set chart position as < A >” appears. (Fig. 1)
7. Set the AF chart I (Horizontal), and adjust the focus frame to the specified position and click “OK”.
8. Repeat step 7. (Form position < A > to < D >)
9. “Adjust <5 ISLAND> Please set chart position as < E >” appears. (Fig. 3)
9. “Adjust <5 ISLAND> Please set chart position as < E >” appears. (Fig. 3)
Fig. 1
D C B A
3rd. 4th. 6th.
AF chart
I
(Horizontal)
Focus Frame
Following the message, adjust the upper right corner of
focus frame to A - D position of AF chart
focus frame to A - D position of AF chart
I
.
Fig. 2
Fig. 3
Click on the first or last page to see other DSLR-A100 / DSLR-A100H / DSLR-A100K / DSLR-A100W (serv.man3) service manuals if exist.