Read Sony PHA-3 / PHA-3AC Service Manual online
SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
PHA-3/3AC
SPECIFICATIONS
9-896-067-01
2014I33-1
©
2014.09
US Model
Canadian Model
E Model
Australian Model
Chinese Model
Russian Model
PHA-3
AEP Model
UK Model
PHA-3AC
Ver. 1.0 2014.09
Frequency range
10 Hz – 100 kHz (AUDIO IN input)
Distortion 0.01 % or less (1 kHz)
Distortion 0.01 % or less (1 kHz)
Supported impedance
8 Ω - 600 Ω
Maximum input
2 Vrms (AUDIO IN)
Maximum output (when using the built -in lithium-ion
r
Maximum output (PHA-3AC)
r
Maximum output (PHA-3AC)
echargeable battery) (PHA-3)/
Balanced connection
Approx. 320 mW + 320 mW (32 Ω, 1 % distortion)
Normal connection
Approx. 100 mW + 100 mW (32 Ω, 1 % distortion)
Output jack
3-pole mini jack (
(headphones) BALANCED-L)
3-pole mini jack (
(headphones) BALANCED-R)
Stereo mini jack*
1
(
(headphones)-NORMAL)
Stereo mini jack*
1
(Switching the input and output of the AUDIO IN/LINE OUT
jack by the OUTPUT switch)
Input jack/port
Computer/W ALKMAN®/Xperia c onnecting port
iPhone/iP ad/iP od connecting port
Optical input connecting port (OPT IN port)
Stereo mini jack*
iPhone/iP ad/iP od connecting port
Optical input connecting port (OPT IN port)
Stereo mini jack*
1
(Switching the input and output of the AUDIO IN/LINE OUT
jack by the OUTPUT switch)
*
*
1
Only a 3 -pole ster eo mini plug is suppor ted. Other plugs, including 2-pole
mini plug or 4 -pole ster eo mini plug, are not supported.
Operating temperature
0 °C to 40 °C (32°F to 104°F)
Charging temperature (PHA-3)
5 °C to 35 °C (41°F to 95°F)
Power source (PHA-3)
DC 3.7 V: built-in lithium-ion rechargeable battery
DC 5 V: when char ging via USB
DC 5 V: when char ging via USB
Battery life* (PHA-3)
2
Analog connection: Approx. 28 hours*
2
Digital (balanced) connection: Approx. 5 hours*
2
Charging time (PHA-3)
When c onnected to a c omputer: Approx. 15 hours*
3
When c onnected to an AC outlet using the recommended USB AC adaptor
(sold separ ately): Approx. 6 hours* (US and Canadian models only)
(sold separ ately): Approx. 6 hours* (US and Canadian models only)
3
*
2
when using the unit at 1 mW + 1 mW output (24 Ω). Time may vary,
depending on the immediate envir onment or c onditions of use .
*
3
Time required for empty batter y to recharge.
Dimensions
Approx. 80 mm × 29 mm × 140. 5 mm
(3
(3
1
/
4
× 1
3
/
16
× 5
5
/
8
in) (w/h/d, projecting parts are not included)
Mas s
Approx. 300 g (10.58 oz) (PHA-3)
Supported sampling frequencies/bit
PCM: when connecting a computer: Maximum 384 kHz/32 bit
when connecting iPhone/iP ad/iP od: Maximum 48 kHz/24 bit
when connecting optical link: Maximum 192 kHz/24 bit
when connecting optical link: Maximum 192 kHz/24 bit
DSD: 2.8 MHz, 5.6 MHz
Included items
Digital cable for WALKMAN® (1)
Digital cable for Xperia (1)
Micro-USB c able (1) (PHA-3)
Digital cable for Xperia (1)
Micro-USB c able (1) (PHA-3)
Stereo mini cable (1)
Silicone belt (4)
Protection sheet (1)
Start Guide (1)
Ref erence Guide (1)
Protection sheet (1)
Start Guide (1)
Ref erence Guide (1)
Operating environment
Compliant OS:
Windows 8.1/Windows 8.1 Pro/Windows 8/Windows 8 Pro
Windows 7
Windows 8.1/Windows 8.1 Pro/Windows 8/Windows 8 Pro
Windows 7
Starter (SP1 or later)/Home Basic (SP1 or later)/Home Premium (SP1 or later)/
Professional (SP1 or later)/Ultimate (SP1 or later)
Professional (SP1 or later)/Ultimate (SP1 or later)
Windows Vista
Home Basic (SP2 or later)/Home Premium (SP2 or later)/Busines s (SP2 or
later)/Ultimate (SP2 or later)
later)/Ultimate (SP2 or later)
Mac OS X (v10.6. 8 or later)
CPU: Intel Core 2 Processor 1.6 GHz or better
Memor y: 1 GB or better
USB port (USB 2. 0 High Speed )
CPU: Intel Core 2 Processor 1.6 GHz or better
Memor y: 1 GB or better
USB port (USB 2. 0 High Speed )
One of the above OS need to be installed to the c omputer at the f actory.
The unit is not guaranteed to oper ate with all computers.
The unit is not guaranteed to oper ate with home built computers, operating
systems that ar e personally upgr aded, or multiple operating systems.
The unit is not guaranteed to oper ate with functions such as standby , sleep,
or hibernation, on any computer.
The unit is not guaranteed to oper ate with all computers.
The unit is not guaranteed to oper ate with home built computers, operating
systems that ar e personally upgr aded, or multiple operating systems.
The unit is not guaranteed to oper ate with functions such as standby , sleep,
or hibernation, on any computer.
Design and specific ations are subject to change without notic e.
Rated power c onsumption (AEP, UK and Chinese models)
13.5 W
Approx. 230 g (PHA-3AC)
Micro-USB c able (2) (PHA-3AC)
USB AC adaptor (2) (PHA-3AC)
Power source (PHA-3AC)
DC 5 V: when using the AC adapto r
PHA-3
PORTABLE HEADPHONE AMPLIFIER
PHA-3AC
HEADPHONE AMPLIFIER
Photo: PHA-3
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
PHA-3/3AC
2
Compatible iPhone/iP ad/iP od models
You can use the unit with only the f ollowing models. Update
your iPhone, iPad or iPod to the latest softw are before use .
your iPhone, iPad or iPod to the latest softw are before use .
iPhone 5s
iPhone 5c
iPhone 5
iPhone 4s
iPhone 4
iPhone 3GS
iPad Air
iPad mini with Retina display
iPad (4th gener ation)
iPad mini
iPad (3rd generation)
iPad 2
iPad
iPhone 5c
iPhone 5
iPhone 4s
iPhone 4
iPhone 3GS
iPad Air
iPad mini with Retina display
iPad (4th gener ation)
iPad mini
iPad (3rd generation)
iPad 2
iPad
iPod touch (5th generation)
iPod touch (4th gener ation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod clas sic 120GB/ 160GB
(2009)
iPod nano (7th generation)
iPod nano (6th gener ation)
iPod nano (5th gener ation)
iPod nano (4th gener ation)
iPod nano (3rd generation)
iPod touch (4th gener ation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod clas sic 120GB/ 160GB
(2009)
iPod nano (7th generation)
iPod nano (6th gener ation)
iPod nano (5th gener ation)
iPod nano (4th gener ation)
iPod nano (3rd generation)
(As of July 2014)
Design and specific ations are subject to change without notic e.
Trademark Notices
WALKMAN® and W ALKMAN® logo ar e registered trademarks of Sony
Corporation.
“Xperia” and “Xperia Tablet” are trademarks of Sony Mobile
Communic ations AB.
iPad, iPhone, iPod, iPod clas sic, iPod nano , iPod touch, and Retina ar e
trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air,
and iPad mini are trademarks of Apple Inc.
“Made f or iPod,” “Made f or iPhone,” and “Made f or iPad” mean that an
electronic accessory has been designed to c onnect specific ally to iPod,
iPhone or iPad, respectively, and has been certified by the developer to
meet Apple perf ormanc e standar ds. Apple is not responsible f or the
operation of this device or its compliance with saf ety and regulatory
standards. Please note that the use of this a ccessory with iPod, iPhone, or
iPad may aff ect wireless perf ormanc e.
Macintosh and Mac OS ar e trademarks of Apple Inc., registered in the U.S.
and other countries.
Microsoft, Windows and Windows Vista ar e registered trademarks or
trademarks of Micr osoft Corporation in the United States and/or other
countries.
All other trademarks and r egistered trademarks ar e trademarks or
registered trademarks of their r espective holders. In this manual, TM and ®
marks ar e not specified.
Corporation.
“Xperia” and “Xperia Tablet” are trademarks of Sony Mobile
Communic ations AB.
iPad, iPhone, iPod, iPod clas sic, iPod nano , iPod touch, and Retina ar e
trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air,
and iPad mini are trademarks of Apple Inc.
“Made f or iPod,” “Made f or iPhone,” and “Made f or iPad” mean that an
electronic accessory has been designed to c onnect specific ally to iPod,
iPhone or iPad, respectively, and has been certified by the developer to
meet Apple perf ormanc e standar ds. Apple is not responsible f or the
operation of this device or its compliance with saf ety and regulatory
standards. Please note that the use of this a ccessory with iPod, iPhone, or
iPad may aff ect wireless perf ormanc e.
Macintosh and Mac OS ar e trademarks of Apple Inc., registered in the U.S.
and other countries.
Microsoft, Windows and Windows Vista ar e registered trademarks or
trademarks of Micr osoft Corporation in the United States and/or other
countries.
All other trademarks and r egistered trademarks ar e trademarks or
registered trademarks of their r espective holders. In this manual, TM and ®
marks ar e not specified.
SECTION 1
SERVICING NOTES
ABOUT PARTS REPAIR OF EACH BOARDS
When each boards installed in this unit are defective, individual
electrical parts that the mount is done cannot be replaced. When
each boards are defective, replace the mounted board or the whole
parts including an applicable board.
However, some mount parts such as jack, connector and switch
are replaceable.
Refer to “3. EXPLODED VIEWS” (page 9) for replaceable parts.
When each boards installed in this unit are defective, individual
electrical parts that the mount is done cannot be replaced. When
each boards are defective, replace the mounted board or the whole
parts including an applicable board.
However, some mount parts such as jack, connector and switch
are replaceable.
Refer to “3. EXPLODED VIEWS” (page 9) for replaceable parts.
The SERVICING NOTES contains important information for
servicing. Be sure to read this section before repairing the
unit.
servicing. Be sure to read this section before repairing the
unit.
DESTINATION ABBREVIATIONS
The following abbreviations for model destinations are used in this
service manual.
The following abbreviations for model destinations are used in this
service manual.
• Abbreviations
AUS :
AUS :
Australian
model
CH
: Chinese model
CND : Canadian model
RU
RU
: Russian model
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-
TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-
NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
PHA-3/3AC
3
SECTION 2
DISASSEMBLY
•
This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
SET
2-3. KNOB
VOL
(Page
4)
2-5. MAIN BOARD BLOCK, COVER BLOCK
(Page
(Page
5)
2-4. GAIN-KNOB
(Page
(Page
5)
2-6. REAR-PANEL, MAIN BOARD
(Page
(Page
6)
2-9. LITHIUM ION BATTERY PACK ASSY (BT1)
(Page
(Page
7)
2-7. LED
BOARD
(Page
6)
2-8. SW
BOARD
(Page
7)
2-2. CABI-BOTTOM
BLOCK
(Page
3)
JIG
When disassembling the unit, use the following jig.
When disassembling the unit, use the following jig.
Part No.
Description
9-913-402-33 Tool for Disassembling
Note: Follow the disassembly procedure in the numerical order given.
2-2. CABI-BOTTOM BLOCK
– Rear bottom view –
6
CABI-bottom block
4
two screws
M1.4
u 2
2
two screws
M1.4
u 2
5
Remove the CABI-bottom block
in the direction of the arrow.
3
Slide the foot pad
in the direction of
the arrow with your
finger
the arrow with your
finger
nail.
1
Pull up the foot pads
with a finger nail.
PHA-3/3AC
4
2-3. KNOB VOL
4
ring sheet
5
ring volume knob
3
VOL inner knob
VOL inner knob
VOL inner
knob
knob
2
knob VOL
jig
paper
hole
Volume
flat side
+RZWRLQVWDOOWKH92/LQQHUNQRE
–)URQWERWWRPYLHZ–
7
washer
(supplied with volume)
volume
–)URQWYLHZ–
1
Insert a jig at the base of the knob VOL and
remove the knob VOL in the direction of arrow
A
by applying pressure like a jig.
Note
1: Insert a piece of paper in order to avoid
damaging the knob VOL. (Do not use tape or
other material which is sticky)
Note 5: When installing the VOL inner
knob, check the direction and
install
correctly.
6
nut (supplied with volume)
Note
4: Use needle-nosed pliers
to remove the nut.
–6LGHYLHZ–
Bottom
Top
0HWKRG5HPRYLQJE\MLJWRROIRUGLVDVVHPEOLQJ
0HWKRG5HPRYLQJE\IODWKHDGVFUHZGULYHU
A
Note 2: Lay a soft piece of cloth under the jig
to avoid damaging the unit.
1
Insert a flathead screwdriver into the hole
and push the screwdriver in the direction
of
arrow
A in order to push the knob VOL
out in the direction of arrow
B.
Note
3: Prevent a short circuit by wrapping the
flathead screwdriver with electrical tape,
etc. (A nonconducting screwdriver
is
recommended)
A
B
flathead
screwdriver
screwdriver