Read Sony DSC-W510 (serv.man2) Service Manual online
DSC-W510_ADJ
5-6
Adjustment order
Screen display
5-3-5. Dark DP Adjustment
The Dark DP (Dead Pixel) Adjustment order is as follows.
Note:
Perform the Dark DP Adjustment after those performed in 5-3-2 to 5-3-3.
Small pattern box (PTB-1450) setting:
Color temperature = 3100 ± 200K
Luminance: LV12.2 ± 0.5
The adjustment is finished normally.
Fig. 5-3-13
The adjustment is complete.
The adjustment is finished abnormally.
Fig. 5-3-14
Malfunction of Dark DP
adjustment result
Adjustment order
Screen display
5-3-6. Light/S.S Adjustment
The Light/S.S (Light Dead Pixel/Slow Shutter Dead Pixel)
Adjustment order is as follows.
Note:
Perform the Light/S.S Adjustment after those performed in 5-3-2 to 5-3-3.
The adjustment is finished normally.
Fig. 5-3-17
The adjustment is complete.
The adjustment is finished abnormally.
Fig. 5-3-18
Malfunction of Light
adjustment result
Fig. 5-3-19
Malfunction of S.S
adjustment result
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-14)
In this case, confirm the adjusting environment
and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “Dark DPC (LV10)”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
* If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
In case of the adjustment is finished normally,
the adjustment completion indication appears
on the screen. (Fig. 5-3-13)
Press the “
(Playback)” button to return to
adjustment menu.
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-3-12)
Confirm the indication
on the screen.
Finished abnormally.
Finished normally.
In case of the adjustment is finished abnormally,
the following indication appears on the screen.
(Fig. 5-3-18, 5-3-19)
In this case, confirm the adjusting environment
and readjust.
Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “Light S.S (BLACK)”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
*1 If the adjustment is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the adjustment. (Page 5-3)
*2 It takes approximately 15 minutes or more on this adjustment.
In case of the adjustment
is finished normally, the
adjustment completion
indication appears on the
screen. (Fig. 5-3-17)
* The Self-timer lamp
lights up. (Fig. 5-3-16)
Check that the camera is on the adjustment mode.
* For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
Cover camera lens (All black) (Fig. 5-3-15)
Restart the camera.
Self-timer lamp
Fig. 5-3-16
Equipment required: Small pattern box (PTB-1450)
Clear chart
Fig. 5-3-12
Small pattern box
(PTB-1450)
5 mm
or less
Camera
Fig. 5-3-15
Camera
Equipment required: Cover camera lens
(All black)
Black cloth
Click on the first or last page to see other DSC-W510 (serv.man2) service manuals if exist.