Read Sony HBD-DZ340 / HBD-DZ340K / HBD-DZ640K / HBD-DZ740 Service Manual online
SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
SPECIFICATIONS
DVD RECEIVER
9-893-146-05
2012E33-1
©
2012.05
AEP Model
HBD-DZ340/DZ740
E Model
HBD-DZ340K/DZ640K
Ver. 1.4 2012.05
• HBD-DZ340/DZ340K/DZ640K/DZ740 are the amplifi er, DVD/CD
and tuner section in DAV-DZ340/DZ340K/DZ640K/DZ740.
Model Name Using Similar Mechanism
HBD-DZ330/DZ710/
DZ730
DZ730
Mechanism Type
CDM85MB-DVBU102
Optical Pick-up Name
KHM-313CAA
This system incorporates with Dolby* Digital and Dolby Pro Logic adaptive
matrix surround decoder and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
matrix surround decoder and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
Laboratories.
** Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and DTS Digital Surround
are registered trademarks and the DTS logos and Symbol are trademarks
of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
worldwide patents issued & pending. DTS and DTS Digital Surround
are registered trademarks and the DTS logos and Symbol are trademarks
of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
Amplifi er Section (DAV-DZ340/DZ740)
POWER OUTPUT (rated): Front L/Front R/Center/
Surround L/Surround R:
108 W (per channel at 3
ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference):
Front L/Front R/Center/
Surround L/Surround R:
167 W (per channel at 3
ohms, 1 kHz)
Subwoofer:
165
W
(at 3 ohms, 80 Hz)
Inputs (Analog)
TV (AUDIO IN)
TV (AUDIO IN)
Sensitivity: 450/250 mV
Inputs (Digital)
TV (Audio Return Channel/OPTICAL IN)
TV (Audio Return Channel/OPTICAL IN)
Input Stream: Dolby
Digital 5.1ch/DTS 5.1ch/
Linear PCM 2ch
(Sampling Frequency: less
than 48 kHz)
Amplifi er Section (DAV-DZ340K/DZ640K)
POWER OUTPUT (rated): Front L/Front R/Center/
Surround L/Surround R:
108 W (per channel at 3
ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference):
Front L/Front R/Center/
Surround L/Surround R:
167 W (per channel at 3
ohms, 1 kHz)
Subwoofer: 165 W (at 3
ohms, 80 Hz)
Inputs (Analog)
TV (AUDIO IN)
TV (AUDIO IN)
Sensitivity: 450/250 mV
AUDIO IN
Sensitivity: 250/125 mV
MIC
Sensitivity: 1 mV
Inputs (Digital)
TV (Audio Return Channel)
TV (Audio Return Channel)
Input Stream: Dolby
Digital 5.1ch/DTS 5.1ch/
Linear PCM 2ch
(Sampling Frequency: less
than 48 kHz)
CD/DVD System
Laser Diode Properties
Emission Duration:
Continuous
Laser Output: Less than
44.6
W
* This output is the value measurement at a distance
of 200 mm from the objective lens surface on the
Optical Pick-up Block with 7 mm aperture.
of 200 mm from the objective lens surface on the
Optical Pick-up Block with 7 mm aperture.
Signal format system
Latin American models: NTSC
Other models:
Latin American models: NTSC
Other models:
NTSC/PAL
– Continued on next page –
HBD-DZ340/DZ340K/
DZ640K/DZ740
HBD-DZ340/DZ340K/DZ640K/DZ740
2
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
USB Section
(USB) port:
Maximum current:
500 mA
Tuner Section
System
PLL quartz-locked digital
synthesizer
Tuning range
Tuning range
87.5 MHz - 108.0 MHz
(50 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Video Section (DAV-DZ340/DZ740)
Outputs
VIDEO: 1 Vp-p 75 ohms
R/G/B: 0.7 Vp-p 75 ohms
HDMI OUT: Type A (19 pin)
Video Section (DAV-DZ340K/DZ640K)
Outputs
DAV-DZ340K:
DAV-DZ340K:
VIDEO: 1 Vp-p 75 ohms
HDMI OUT: Type A (19 pin)
DAV-DZ640K:
VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB, PR: 0.7 Vp-p 75 ohms
HDMI OUT: Type A (19 pin)
General
Power requirements
Taiwan models:
Taiwan models:
120 V AC, 50/60 Hz
Argentine models:
220 V - 240 V AC, 50/60 Hz
Latin American models: 110 V - 240 V AC, 50/60 Hz
Saudi Arabian models:
Saudi Arabian models:
127 V - 240 V AC, 50/60 Hz
Other models:
220 V - 240 V AC, 50/60 Hz
Power consumption
On: 160 W
Standby:
0.3
W*
* Valid when the system is in the following status:
– “DEMO” is set to “OFF.”
– [CONTROL FOR HDMI] is set to [OFF].
– “DEMO” is set to “OFF.”
– [CONTROL FOR HDMI] is set to [OFF].
Dimensions (approx.)
430 mm
55 mm 350 mm (w/h/d) incl.
projecting
parts
Mass (approx.)
3.5 kg
Supported fi le format
MP3 (MPEG 1 Audio Layer-3)
MP3 (MPEG 1 Audio Layer-3)
File Extension:
mp3
Bitrate:
32 kbps - 320 kbps
Sampling frequencies:
32/44.1/48 kHz
WMA (USB device only)
File Extension:
wma
Bitrate:
48 kbps - 192 kbps
Sampling frequencies:
44.1 kHz
AAC (USB device only)
File Extension:
m4a
Bitrate:
48 kbps - 320 kbps
Sampling frequencies:
44.1 kHz
Xvid
File Extension:
avi
Video codec:
Xvid video
Bitrate:
4.854 Mbps (MAX)
Resolution/Frame rate:
720
480 30 fps
720
576 25 fps
Audio codec:
MP3
MPEG4
File format:
MP4 File Format
File Extension:
mp4/m4v
Video codec:
MPEG4 Simple Profi le
(AVC is not compatible.)
Bitrate:
4 Mbps
Frame rate:
30 fps
Resolution:
720
576
Audio codec:
AAC-LC (HE-AAC is not compatible.)
DRM:
Not compatible
Design and specifi cations are subject to change without notice.
SPECIAL COMPONENT NOTICE
The components identifi ed by mark
The components identifi ed by mark
9 contain confi dential infor-
mation.
Strictly follow the instructions whenever the components are re-
paired and/or replaced.
Strictly follow the instructions whenever the components are re-
paired and/or replaced.
Ver. 1.1
HBD-DZ340/DZ340K/DZ640K/DZ740
3
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong
viscosity
Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
NOTES ON CHIP COMPONENT REPLACEMENT
•
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
aged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
•
•
Keep the temperature of soldering iron around 270 °C during
repairing.
repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
or unsoldering.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
exceeding the limit for Class 1.
This appliance is classifi ed as
a CLASS 1 LASER product.
This marking is located on the
rear or bottom exterior.
a CLASS 1 LASER product.
This marking is located on the
rear or bottom exterior.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
HBD-DZ340/DZ340K/DZ640K/DZ740
4
Model
Part No.
DZ340: AEP, IT
4-267-102-0[]
DZ340K: E3, E93
4-267-102-1[]
DZ740: AEP
4-267-102-2[]
DZ640K: E3, E93
4-267-102-3[]
DZ640K: E15
4-267-102-4[]
DZ340K: E12
4-267-102-9[]
DZ340K: EA
4-267-103-0[]
DZ340K: SP
4-267-103-1[]
DZ340K: E32
4-267-103-2[]
DZ640K: E12
4-267-103-4[]
DZ640K: EA
4-267-103-5[]
DZ640K: SP
4-267-103-6[]
DZ340K: SAF
4-267-104-3[]
DZ340K: PH
4-267-104-4[]
DZ340K: TH
4-267-104-5[]
DZ340K: TW
4-267-104-6[]
DZ640K: PH
4-267-104-8[]
DZ640K: TH
4-267-105-0[]
MODEL IDENTIFICATION
– Back Panel –
– Back Panel –
(When letters/numbers appear in the
display)
display)
When the self-diagnosis function is activated to
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the TV screen or front panel display. In this case,
check the following table.
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the TV screen or front panel display. In this case,
check the following table.
When the version number
appears on the TV screen
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfunction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfunction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
Self-diagnosis Function
First 3
characters of
the service
number
characters of
the service
number
Cause and/or corrective action
C 13
The disc is dirty.
,Clean the disc with a soft cloth.
,Clean the disc with a soft cloth.
E XX
(XX is a
number)
number)
To prevent a malfunction, the
system has performed the self-
diagnosis function.
,Contact your nearest Sony
system has performed the self-
diagnosis function.
,Contact your nearest Sony
dealer or local authorized Sony
service facility and give the 5-
character service number.
service facility and give the 5-
character service number.
Example: E 61 10
C:13:50
VER.X.XX
Parts No.
Ver. 1.4
• Abbreviation
E3
E3
: 240V AC area in E model
E12
: 220 – 240V AC area in E model
E15
: Iranian model
E32
: 110 – 240V AC area in E model
E93
: 240V AC area in E model (Including E3 area)
EA
: Saudi Arabia model
IT
: Italian model
PH
: Philippines model
SAF
: South African model
SP
: Singapore model
TH :
Thai
model
TW :
Taiwan
model
