Read Sony DSC-W510 (serv.man2) Service Manual online
DSC-W510_ADJ
5-3
5-1-6. Enabling the Adjustment
The item that has been adjusted may be disabled to be readjusted.
If the readjustment is required, or when replacing Lens Assy (Complete Assy (1380E)), CCD Block Assy and ST Board, it is necessary to enable
the adjustment upon the following procedure.
1) Press the Control button “ b ” “ B ” and “ v ” “ V ” to choose an adjustment item.
2) Press the “ (Playback)” button.
3) Press the Control button “ b ”.
(Disable “00001” → Disable “00000”) (Fig. 5-1-7)
Example: For MB/LCD
5-2. MB/LCD FUNCTION CHECK
The MB (Main Board)/LCD Function Check order is as follows.
If NG appears for more than one check item, confirm the adjusting
environment and recheck. (Fig. 5-2-4)
Fig. 5-2-4
Example: NG appears for
Iris and MSHUT.
1)
Check that the camera is on the adjustment mode.
Note:
For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
2) Place the camera in front of the Small pattern box (PTB-1450). (Fig. 5-2-2)
3) Press the Control button “ b ” “ B ” and “ v ” “ V ” to change selected item. Choose “MB/LCD”,
press the Control button “ z ”, select “OK”, and press the Control button “ z ” to start.
Note:
If the check is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the check. (Page 5-3)
4) Confirm the indication on the screen.
If OK appears for all check items, press the “ (Playback)” button
to return to adjustment menu. (Fig. 5-2-3)
Function check items
Item
Description
RTC
Compare Crystal RTC time and OS time. If Crystal RTC time and OS time are the same, conform to spec.
Iris
Change difference aperture to check their luminance value. If it has different luminance value, conform to spec.
MSHUT
Change difference Mechanical Shutter ON/OFF to check their luminance value. If it has different luminance value,
conform to spec.
ZOOM
Change difference Lens ZOOM IN/OUT position to check their zoom position value. If it has different zoom position
value, conform to spec.
STROB
Strobe board flash function, check if it can be triggered or not.
CARD
Check Memory card socket can be read/written.
Mem
Check Internal memory size, conform to spec.
AUDIO
REC/PLAY audio file, check Microphone and Speaker are working.
Handling of 9 Colors Chart
When performing adjustments using the 9 colors chart, insert the
transparent window in the lower right position. (Fig. 5-2-1)
5-1-5. Setting the Adjustment Mode
1) Download the adjustment tool “ADJ_Tool_W510_Ver[][][].zip” from the ESI homepage.
Uncompress the “ADJ_Tool_W510_Ver[][][].zip”, then confirm that it includes the following items.
• EnableTest.txt
• USB Driver (Folder)
• Service Tool (Folder)
The above two folders “USB Driver” and “Service Tool” are used in “5-3-9. Set Language Destination”. (Page 5-8)
2) Save the uncompressed file “EnableTest.txt” in the root directory of the SD-Card or Memory Stick Duo after formatting the it.
Note:
Saving it in other directories causes a malfunction of program.
Save the SD-Card or Memory Stick Duo after confirming that the “EnableTest.txt” is empty.
Be sure to format the SD-Card or Memory Stick Duo on the camera.
If “EnableTest.txt” is still remained after the adjustment, delete it.
3) With the camera turned off, insert the SD-Card or Memory Stick Duo with the “EnableTest.txt” into the Memory card slot of the camera.
4) Press the “ (Playback)” button while pressing the “T (W/T)” button and the Control button “ z ”.
5) After a few seconds, the Adjustment mode screen will appear on the LCD display. (Fig. 5-1-5)
6) Press the “ (Playback)” button, the initial screen for the adjustment mode will appear. (Fig. 5-1-6)
Small pattern box
9 colors chart
Transparent window
Fig. 5-2-1
Fig. 5-2-3
Disabled
Enabled
Fig. 5-1-7
Fig. 5-1-5
Fig. 5-1-6
Equipment required: Small pattern box (PTB-1450)
9 colors chart
Fig. 5-2-2
Small pattern box
(PTB-1450)
5 mm
or less
Camera
Click on the first or last page to see other DSC-W510 (serv.man2) service manuals if exist.