DSC-W510 (serv.man2) - Sony Digital Camera Service Manual (repair manual). Page 8

Read Sony DSC-W510 (serv.man2) Service Manual online

DSC-W510_ADJ
5-8
5-3-8. Lens Option
Lens Option Setting order is as follows.
1)
Check that the camera is on the adjustment mode.
 
Note:
 
For the setting procedure of the adjustment mode, refer to “5-1-5. Setting the Adjustment Mode” (Page 5-3).
2)  Press the Control button “ b ” “ B ” and “ v ” “ V ”to change selected item. Choose “Lens Option”, 
 
press the “   (Playback)” button to choose item.
 
Note:
 
If the setting is disabled, refer to “5-1-6. Enabling the Adjustment” to enable the setting. (Page 5-3)
3)  Press the Control button “ V ” to “Enable LDC” item after press the Control button “ B ” to set enable (00001). 
Press the Control button “ V ” to “Enable LSC” item after press the Control button “ B ” to set enable (00001). 
Final Press the “   (Playback)” button to return to adjustment mode, then press the Control button “ z ”, 
 
select “OK” and press the Control button “ z ” to start.
 
Note:
 
LDC : Lens Distortion Correction
 
LSC : Lens Shading Correction
4)  Confirm the indication on the screen. 
When the setting is finished, the setting completion indication appears on the screen. (Fig. 5-3-24) 
Press the “   (Playback)” button to return to adjustment menu.
5-3-9. Set Language Destination
Note:
 
Finish all of the adjustment except for the Language Destination setting.
Once the Language Destination setting is finished, it cannot be reset.
USB Driver and Service Tool
Put the two folders “USB Driver” and “Service Tool” downloaded in “5-1-5. Setting the Adjustment Mode” (Page 5-3) in any place of the PC.
The procedure of installing a USB Driver is as follows.
1)  Connect the camera started up with the Adjustment mode, and the PC with a Dedicated USB Cable.
2)  Install the USB Driver according to the guidance on the screen.
Connecting USB to PC
Connect the equipment as shown below. (Fig. 5-3-25)
Starting up the Service Tool
Double click the “ServiceTool_Ver[][][].exe” in the “Service Tool” folder to start up the Service Tool. (Fig. 5-3-26)
Dedicated USB Cable
Personal Computer
1 To a USB jack of the PC
2 To the
(USB)/A/V OUT
jack
Fig. 5-3-25
Fig. 5-3-24
Fig. 5-3-26
Page of 9
Display

Click on the first or last page to see other DSC-W510 (serv.man2) service manuals if exist.