PG-M25XE (serv.man29). Setup and connections - Sharp Projector User Guide / Operation Manual. Page 12

Read Sharp PG-M25XE (serv.man29) User Guide / Operation Manual online

To RGB output port
Connecting to a Monitor
Optional
accessory
RGB monitor loop-out
adaptor
Type: AN-A1MY
(7.9" (20 cm))
To RGB input port
Monitor
RGB cable
(commercially available)
1
RGB monitor loop-out adaptor
(sold separately)
Black: to the monitor
Blue: to the computer
Notebook computer
-32
Connecting the Projector to Other Devices (cont.)
Watching Images on
Both the Projector and
a Monitor
You can display computer images on both the
projector and a separate monitor using an RGB
monitor loop-out adaptor and an RGB cable.
1
Connect the projector to the
computer and monitor using an
RGB monitor loop-out adaptor
(sold separately) and an RGB
cable (commercially available).
2
In the “Options(1)” menu, se-
lect “Monitor Out” and then
“Yes (Y cable)”.
• If “Disable” is selected, the projected
image  will be dimmer. This does not
indicate a malfunction. For details, see
page 96
.
Note
• When using an RGB monitor loop-out
adaptor (sold separately), make sure that
the cable is connected to the monitor.
• Analog RGB signals as well as Component
signals can be output to the monitor.
Info
• Only analog RGB/Component signals en-
tered into the DVI port can be output to
the monitor.
Signals from equipment connected to the
DVI digital port cannot be output.
Using INPUT 1 Terminal
with the Terminal Cover
Attached to the
Projector
The INPUT 1 terminal can be used with the ter-
minal cover folded as shown in the illustration.
Page of 12
Display

Download Sharp PG-M25XE (serv.man29) User Guide / Operation Manual