DCR-DVD105, DCR-DVD105E, DCR-DVD605, DCR-DVD605E (serv.man2) - Sony Movie Service Manual (repair manual)

dcr-dvd105, dcr-dvd105e, dcr-dvd605, dcr-dvd605e (serv.man2) service manual
Model
DCR-DVD105 DCR-DVD105E DCR-DVD605 DCR-DVD605E (serv.man2)
Pages
68
Size
3.89 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 2
File
dcr-dvd105-dcr-dvd105e-dcr-dvd605-dcr-dvd605e-sm2.pdf
Date

Read Sony DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man2) Service Manual online

SERVICE MANUAL
Sony EMCS Co.
LEVEL
 
2
Link
SERVICE NOTE
MODEL INFORMATION TABLE
SPECIFICATIONS
BLOCK DIAGRAMS
SCHEMATIC DIAGRAMS
DISASSEMBLY
REPAIR PARTS LIST
PRINTED WIRING BOARDS
Link
Revision History
Revision History
How to use
Acrobat Reader
How to use
Acrobat Reader
DCR-DVD105/DVD105E/DVD605/DVD605E_L2
Ver. 1.4  2008.03
DIGITAL VIDEO CAMERA RECORDER
Photo: DCR-DVD105
The components identified by
mark  0  or dotted line with
mark 0 are critical for safety.
Replace only with part num-
ber specified.
Les composants identifiés par une
marque  0  sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
2008C0500-1
  © 2008.3
Published by Kohda TEC
9-876-924-32
US Model
Canadian Model
AEP Model
UK Model
East European Model
North European Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
DCR-DVD105/DVD105E/
DVD605/DVD605E
Revised-1
— 2 —
DCR-DVD105/DVD105E/DVD605/DVD605E_L2
SPECIFICATIONS
These specifications are extracted from instruction
manual of DCR-DVD105E/DVD605E.
System
Video compression format
MPEG2/JPEG (Still images)
Audio compression format 
Dolby Digital 2ch
Dolby Digital Stereo Creator
Video signal
PAL color, CCIR standards
Usable discs
8cm DVD-R/DVD-RW/DVD+RW
Recording format
Movie
DVD-R:
DVD-VIDEO
DVD-RW: DVD-VIDEO (VIDEO mode),
DVD-Video Recording
(VR mode)
DVD+RW: DVD+RW Video
Still image
Exif 
*1
 Ver.2.2
Recording/playback time
HQ: Approx. 20 min
SP: Approx. 30 min
LP: Approx. 60 min
Viewfinder
Electric viewfinder
color
Image device
3 mm (1/6 type) CCD (Charge Coupled Device) 
Gross: 
Approx. 800 000 pixels
Effective (Movie): 
Approx. 400 000 pixels
Effective (Still): 
Approx. 400 000 pixels
Lens
Carl Zeiss  Vario-Tessar
Filter diameter: 25mm (1 in.)
Optical:20
×
, Digital:40
×
, 800
×
F=1.8-3.1
Focal length
f=2.3 - 46mm (3/32 - 1 13/16 in.) 
When converted to a 35 mm still camera
For movies:
44 - 880mm (1 3/4 - 34 1/32 in.)
For still images:
44 - 880mm (1 3/4 - 34 1/32 in.)
Color temperature 
[AUTO], [ONE PUSH], [INDOOR] (3 200 K), 
[OUTDOOR] (5 800 K)
Minimum illumination
5 lx (lux) (F1.8)
0 lx (lux) (in the NightShot plus function)
*2
*1
“Exif” is a file format for still images, established 
by the JEITA (Japan Electronics and Information 
Technology Industries Association). Files in this 
format can have additional information such as 
your camcorder’s setting information at the time 
of recording.
*2
Objects unable to be seen due to the dark can be 
shot with infrared lighting.
• Manufactured under license from Dolby 
Laboratories.
Input/Output connectors 
Audio/Video output
10 pin connector
Video signal: 1 Vp-p, 75 
 (ohms), unbalanced
Luminance signal: 1 Vp-p, 75 
 (ohms), 
unbalanced
Chrominance signal: 0.3 Vp-p, 75 
 (ohms), 
unbalanced
Audio signal: 327 mV (at Load impedance
47 k
 (kilohms)), Output impedance less than 
2.2 k
 (kilohms)
LCD screen
Picture
6.2 cm (2.5 type)
Total number of pixels
123 200 (560 
×
 220)
General
Power requirements
7.2 V (battery pack) 
8.4 V (AC Adaptor)
Average power consumption 
During camera recording using LCD
Viewfinder
Operating temperature
0
°
C to + 40
°
C (32
°
F to 104
°
F)
Storage temperature
-20
°
C to + 60
°
C (-4
°
F to + 140
°
F)
Dimensions (Approx.)
54 
×
 88 
×
 129mm (2 1/4 
×
 3 1/2 
×
 5 1/8 in.) 
(w 
×
 h 
×
 d)
Mass (Approx.)
380 g (13 oz) main unit only
430 g (15 oz) including the NP-FP50 
rech
AC Adaptor (1)
Mains lead (1)
A/V connecting cable (1)
Rechargeable battery pack
NP-FP50 (1)
Cleaning cloth (1)
Lens cap (1)
Operating Guide (This manual) (1)
argeable battery pack and disc
Supplied accessories
AC Adaptor AC-L25A/L25B
Power requirements
AC 100 - 240 V, 50/60 Hz
Current consumption
0.35 - 0.18 A
Power consumption
18W
Output voltage
DC 8.4V
*
Operating temperature
0
°
C to + 40
°
C (32
°
F to 104
°
F)
Storage temperature
-20
°
C to + 60
°
C (-4
°
F to + 140
°
F)
Dimensions (Approx.)
56 
× 
31 
×
 100 mm (2 1/4 
×
 1 1/4 
×
 4 in.) 
(w 
× 
× 
d) excluding the projecting parts
Mass (Approx.)
190 g (6.7 oz) excluding the mains lead
*
See at the label of AC Adaptor for other 
specifications.
Rechargeable battery pack NP-FP50
Maximum output voltage
DC8.4V
Output voltage
DC7.2V
Capacity
4.9 wh (680 mAh)
Dimensions (Approx.)
31.8 
×
 18.5 
×
 45.0 mm
(1 5/16 
×
 3/4 
×
 1 13/16 in.) (w
×
h
×
d)
Mass (Approx.)
40 g (1.5 oz)
Operating temperature
0
°
C to + 40
°
C (32
°
F to 104
°
F)
Type
Li-ion
Design and specifications are subject to change 
without notice.
— 3 —
DCR-DVD105/DVD105E/DVD605/DVD605E_L2
Model information table
• Abbreviation
AR
: Argentine model
AUS : Australian model
BR
: Brazilian model
CH
: Chinese model
CND : Canadian model
EE
: East European model
HK : Hong Kong model
JE
: Tourist model
KR
: Korea model
MX : Mexican Model
NE
: North European model
Model DCR-DVD105 DCR-DVD105E DCR-DVD605 DCR-DVD605E
Destination
US, CND, E, AR, BR
AEP, UK, NE, EE
E, KR
E, HK, AUS, CH
Color system
NTSC
PAL
NTSC
PAL
— 4 —
DCR-DVD105/DVD105E/DVD605/DVD605E_L2
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
WARNING!!
WHEN  SERVICING,  DO  NOT  APPROACH  THE  LASER
EXIT  WITH  THE  EYE  TOO  CLOSELY.  IN  CASE  IT  IS
NECESSARY  TO  CONFIRM  LASER  BEAM  EMISSION,
BE  SURE  TO  OBSERVE  FROM  A  DISTANCE  OF MORE
THAN   30  cm  FROM  THE  SURFACE  OF  THE
OBJECTIVE  LENS  ON  THE  OPTICAL  PICK-UP  BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Page of 68

Download Sony DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sony DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man2) Service Manual in PDF. DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man2) Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.