PAS (serv.man3). New PageCounter terminal Administrators Guide. This is for the new replacement for the PCS100. - Sharp Copying Equipment Service Manual (repair manual). Page 9

 

PageCounter Administrator Guide Page 

7 

•  Terminal display – LED display 
•  Numeric keypad – calculator format 
•  Dual Ethernet – allows you to use the terminal as a mini-hub when connecting 

multifunction devices. Eliminates the need for new wiring or multiple network 
drops. 

•  Copy support – by default, allows copies only after accounting data is entered. 
•  Metal bypass key – allows administrators to enable the copier to bypass 

accounting data entry. 

•  Storage capacity – 64 MB hard disk that can store up to 100,000 accounting 

codes and code descriptions and up to 10,000 transactions at the terminal. 
Terminal storage functionality available when the terminal is configured for 
Mode 1 communication only. 

•  QWERTY keyboard – standard keys and additional Equitrac function keys used 

to enter information into the terminal for completing transactions 

• 

Magstripe reader device  – magnetic card reader that uses encoded magnetic 
cards, in place of the keyboard, to enter transaction data on Track 2. 

 

• 

V.34 fax support – allows the terminal to serve as a fax terminal without 
requiring the customer to purchase an additional terminal. Multiple fax options 
are not supported. Fax support available when the terminal is configured for 
Mode 1 communication only.

 

•  Cost recovery software – Terminal software that includes Search, Scan, Recall, 

Global Recall, and SmartPrompt functionality. Cost recovery software available 
when the terminal is configured for Mode 1 communication only.  

The following functionality can be configured by the System Administrator. 

•  User timeout – the terminal returns to Idle Mode from a prompt when it detects 

no terminal activity for a specified amount of time. 

•  Device timeout – the terminal returns to Idle Mode when it detects no device 

activity for a specified amount of time. Default device timeout is 150 seconds. 

The following functionality can be configured by the System Administrator and is 
available when the PageCounter terminal is set to Mode 1 communication.